Search results

Selling my BootMod3 license for the A90 supra. $500. Let me know, thanks!

Given most OTS tune results, a Stage 2 tune is approximately a 26% increase depending on the fuel you plan on using. Most ECUTEK tunes are custom so there is no way to give you a true accurate number without seeing it. Overall stage 2 with a good tune is a night and day difference compared to...

Recently got some wheels. Fronts - 19 x 9.5, +22 offset with 275/30/19 tires,Rears - 19 x 11.0, +35 offset with 305/30/19 tires. Sitting on H&R springs. Overall fitment is good, but I always slightly rub when going up my driveway. Speed bumps are fine with no rubbing as well as driving.

Supra got some new shoes so I decided to go out and mess around with the camera.

Here is a floor jack that clears stock height and a drop with H&R springs: https://www.harborfreight.com/3-ton-low-profile-rapid-pump-floor-jack-64264.html Use pucks of course. For torque wrench, any will do that can apply 101 ft lbs for stock bolts. You don't want a wrench that is maxing at...

I've never tried to use jack stands since I have ramps; I'm curious. Did you use an adapter with the jack stands to mount on the factory location? Or will the car hold without them?

I know the original post mentioned free core updates to the maps until May 2020 (when beta closes), but how will the support be after May 2020? Will the maps get periodic updates? Or will the maps be untouched from then on?

A month or two ago, I installed an intake on my car and the car runs as expected. Yesterday, I was cleaning the engine bay and bumped the intake. I noticed it was very wiggly / loose. When I checked it out, it turns out the wiggly-ness was because of the factory 90 degree adapter that connects...

Plenty of challenges, I just ignore them. Maybe I got older, but I just dont think it's worth the risk off the track.

You likely found the answer, but for anyone else who was curious: the factory intake tube is technically two pieces, one longer tube and one that is approximately a 90 degree tube. This MST intake simply re-uses the 90 degree piece which connects directly to the turbo.

I would sugges to upload it to youtube then use the URL to post here with the "Media" option. (looks like a film strip icon)

Things will vary depending on if you are going catted or catless, but for the most part: Yes, it will likely increase HP a bit, but it will not be a day/night difference. A tune is what will make the most noticeable difference Depends on your state's emissions laws. With a downpipe, the exhaust...

That's the exact one I have haha. Works great but it wont clear if you are planning to lower your car. I hope there is a model out there that won't involve the use of wood to start haha

For those of you who have lowered your Supras (or other cars), what floor jacks are you using to lift the car for general maintenance? I'll be lowering my car soon and realized my floor jack barely clears the stock height as is. I'm curious what others do.

Hmm, "Mixture too lean" just seems to tell me that the O2 sensor is detecting the changes in flow because of the catless downpipe. Does your MHD tune have an option to not detect the CEL for the downpipe?

Sorry to hear about the inconvenience. It sounds like the dealer was understanding and worked to make it up to you. Good to hear stuff like this.

^^ I dont think that works with an iPod

@Powaup did something happen with the shared link to the DB? I'm getting an error when trying to open via AirTable

The angle of the pic makes it look longer than it is, but it was just a tad bit longer. There were no fitment issues; there was still plenty of room to move around the downpipe while getting it adjusted and such.

I placed a pre-order on a VRSF catted downpipe a while back and it finally got here! I installed it by myself with a set of ramps and a floor jack. Overall, installing a downpipe is doable as one-man job, but obviously a lift and/or two people helps to save you physical fatigue. The downpipe is...