Search results

Anyone know of replacement lug bolts with the swivel washer to protect the wheels?

Awesome.. Thank you.

Thanks ?? . I used to have some on a different car and remember not all valve stems fit on them. I got some coming and was hoping I could use the valve stem they come with and attach the sensor to those if that’s even possible incase the OEM spec didn’t fit somehow. Do you happen to have a...

You still running the TPMS with the Rega’s? And which Valve stem are you using?

Has anyone used the valve stems that come with the new set of wheels and attach those to the TPMS sensor? From what I’ve seen all TPMS sensors come with their own valve stem intact. I got wheels coming but I want to use the Valve stem they come with.

Does the pedal still need to go all the way in maxing out at the firewall like when going in reverse for example, or has that travel also been shortened?

So I got wheels coming in a few months my question is can I use the valve stems that come with the wheels and attach those to the sensor? from what I can see the sensors come with their own valve stem intact. Also if someone could point me to a link of the most recent sensor you guys are using...

So in addition from being lined up with the brake now it also shortened the travel? Does it end sooner now not needing to go all the way in?

Interested. I agree, I could never get my seat position where I’m completely comfortable due to the clutch, it’s ether too far back for the clutch engagement where I have all that travel but then too close for the brake.

@Strat-Supra This topic needs its own thread, I need this. How difficult is the installation? Must be a tight fit to get in there.

??Thanks.. I’m planning to go with 275/35 front and 295/35 rear to stay on the safer side. I’d like a 305/35 but seems some get rubbing. I haven’t decided how much I will lower it yet however. Is there a reason why you’re going 9.5 up front this time around?

@digdeep0169 What’s your offset up front? I’m gonna be ordering wheels soon and planning to go with 19x10+24 up front. But am wondering if I might get slight poke from the fender.

Is there a reason why most go with a 9.5 front?

Any pictures of the fitment?

I’m planning on running similar 19x10+24 front 19x11+37 rear From my findings first off you need aftermarket springs or coilovers incase you don’t already have that. And then will depend on your height. Some have experienced rubbing in the rear with that tire size so I’m going a safer route...

Wish I could swap my hazelnut for red, but my car is Manual so center console can’t be swapped. Also kinda dread removing the steering wheel

Show/street driving. I see a lot of 275 but I’m not sure if that’s going to look a bit stretched compared to the 305 in the rear

What’s the recommended tire width up front if I was to do a 10” I know I want a 35 series sidewall but debating on a 275 or 285.

There a reason why you would do 9.5 width up front? Noticed most do that width up front. I want to do a 10”

I’m looking to run 19x11+37 rear 19x10+24 front on coilovers. I’d like a 305/35 rear but what width tire should I run in the front? For those with similar specs are you guys getting any rubbing anywhere?