Search results

This is just a guess on my part, but if the goal of the buffeting kit is to detach airflow before the window opening, I wouldn’t think that +/- an inch or so would matter as long as the airflow is detached before the window opening. Maybe there’s some difference, but maybe just slightly...

It could be more than a couple years depending on the specific product used. Best advice is to follow the guidance of your installer or the recommendations of the manufacturer of the product used. A lot will depend on the amount of sun/heat exposure during the life of the wrap/film and the...

I think Mashimarho does local installs. Give them a call. Looks like they’re actually in Lynnwood. Otherwise they may be able to recommend another local shop. Be sure to report back on the source of the rubbing and the solution in case it helps someone in the future.

Viofo makes hardwiring kits for their cameras and that’s what you need to buy. It’s worthwhile since their kits also handle low voltage shutoff settings to help keep from overly draining your battery in parking mode. I used a Viofo kit and it worked with zero issues. No troubleshooting and no...

I’d be interested in a non-vented version since I don’t have your duct on the other side due to having an auto and wanting to retain adaptive cruise since my car is a daily and not just a track toy. I also have metal mesh inserts covering the factory openings so the vented version wouldn’t match...

The shop iAutowork in DFW, TX just posted they are now offering same day Femto unlocks or unlock+BM3 combos. Pretty soon there will be unlock locations on every corner. 🤣

Went last your for the Hooked On Driving event and going again this year May 30-31 for the same especially with all the mystery around whether similar events will continue once the track goes private.

Yes, I drive my Supra year round. Temps typically anywhere from near zero to over 100F. Although, the coldest temp since I’ve lived in Oklahoma was close to -30F.

Based on an oil analysis from the Toyota 0w-20 vs. Amsoil Euro 0w-30, total wear metals went from 21ppm to 15ppm, so about a 40% difference with the main difference being iron content. My goal was to use an oil that at least met the SP spec and had a HTHS of at least 3.5 and a NOACK volatility...

@AustexSupra Check our reviews from Todd Deeken on the Everyday Driver YouTube channel. The main reason he loves it are for the light weight relative to most other new cars, steering feel, and handling. If you plan to do any road course or particularly spirited driving, he does agree with other...

Stek gloss black PPF on the roof, Aerobon duckbill spoiler from Amazon, 19” Apex Racing ML-10RT wheels, and a few other minor things.

@NitroYellowMKV could help you out in sourcing a new airbag cover. They sell custom steering wheels and airbag covers as well.

Just wanted to say that I’ve been happy with Project Mu Club Racers, Zimmerman rotors (same as OEM style), and Endless RF-650 brake fluid. Only three track days total so far with one on Hallett Motor Racing Circuit and two on COTA. Good braking performance and no fade for an otherwise stock car...

Update. After over a month of daily driving and a two day track event at COTA, the CEL has still not returned. Bizarre to have to replace an O2 sensor on a 2023 vehicle, but it does appear that AA’s advised fix was the correct solution for me. I’ll update if that changes.

Yes, I’d suggest contacting AA.

I’ve had CEL code 12B701 as well which seems to come back intermittently about a week or so after clearing and always coincides with revving the engine a bit aggressively or at least above 3k RPM or so before it’s warmed up. I finally got around to replacing the post cat O2 sensor and will...

Just to clarify. 2020 is still a B58TU, but it’s a 2-port exhaust as opposed to the later 6-port design that immediately followed. Everything else is the same though as far as I’m aware. Either way, I ordered based on year, make, model, and VIN from Toyota Parts Overstock / Lakeland Toyota. I’ve...

Replacing the after cat O2 sensor was what AA suggested to me as well. I just ordered the sensor, so I’ll report back once I’m able to swap it out. FYI the Toyota part number is 89465WAA02 for xref and appears to be available a bit cheaper than the equivalent BMW part. I have an order into a...

Not sure about currently, but I think myself and others have usually been getting them through Evasive Motorsports. They seem to receive the most regular shipments and have the most reliable ETAs. I just used the Club Racer pads paired with new Zimmerman rotors and Endless fluid for the first...

Renaissance Red ‘23 3.0 Premium Auto. I’m in Collinsville, but sometimes in Bartlesville or Norman.