Search results

https://datazap.me/u/redsupraz/drag?log=0&data=3-16 here is the log from my 11.3xx run. Beginning was burnout and staging. Car seemed to run fine and the same all night. Only thing is feels like it bogs off the line, or I’m not getting enough power at the start like I’m not building enough...

So mods are MHD E40, catless DP, 17x10 MT ST S/S tires. I was only able to get a 1.775 60ft and trap 123mph today. I have reached 11.250 at 125.6 before on stock tires. It seems whenever I leave in 2nd at 2800rpm my car is bogging off the line and not giving me a fast launch. I’m not sure what...

Still there while breaking.

It doesn’t get louder on the highway its mostly audible sound 20-50mph stays the same sound and then goes away at high speeds I feel like. I’ve tried doing the turning thing but I think it stays the same.

No rust. My rear pads needs replacing though the light is on.

They were sitting around 30 when I started driving it again. And I’m not sure what psi when I parked them at. The winter was brutal in New England so lots of 10 degree days and nights, snow, etc

Hey guys, so my Supra sat in my driveway for about 3-3.5 months for the winter. Finally started driving it again and from 20-60mph or so you can hear a loudish humming sound. Gets louder on deceleration I feel like. Very very slight vibration in cabin at low speeds you can hear the trim...

It’s a MHD setting. Hold the stock to get the CEL to flash, those are map switch options. Tap it again and it’s the exhaust flap settings. I think 0 or 1 is closed flap unless you’re in sport, one of the numbers keeps the flap closed always.

I have a cloned DME so I can swap to stock whenever, I’m just wondering if you can run stock tune on a top mount turbo kit with PI under no WOT and just driving 25mph until emission kick in

I’m not sure, all I know is you can’t have a tune that show the emission as “Not Avail”. MHD has an OEM cat setting that lets you turn them on.

Thinking of doing some stuff to the car but not sure how to pass emissions with a PI/Turbo if I went that route.

Looking into learning more on how to work on this motor but not sure where to find in depth info about what sensor is what and which hose goes to what. Thanks

I meant for people who do burn. I got unlucky

How many miles on yours and mods? And yeah you got one of the 21s that burn, mine does as well.

Hey guys, how many miles do you have a on your 2021 Supra so far? The ones with the oil consumption issues I’d to know, and if you guys have done turbo upgrades with it as well. Mine burns about 1 quart every 2500-3k depending how hard I drive. Any issues so far? I’m at 40k miles, anyone with 80+?

I want to try claiming warranty on Supra and looking to see if any other New England guys or Massachusetts area guys know of a good dealer that have reputable techs on these cars. Thanks.

I have 17x10 beadlocks but need lugs. Which lug size do I need to fit my Supra?

Are you modified at all and which oil are you running?

Thanks.

Who did you go to for the built short block? I was looking at titan with the billet main caps for the future. Does your built motor burn oil or is everything good to go? And wow do the 2020s get those same issues?