So I removed my front seat to find a noise itās been making. Didnāt find the noise but when I reinstalled the seat and turned the car on I got a ācar restraint systemā malfunction warning that says to take it to dealer. I have BimmerCode, can that clear it? Any other way to clear it?
Iām in my car with my 15 year old daughter and in the course of our drive we saw three 370ās. Each time they saw us or got near they revved their engines with their fart can exhausts. My daughter asked āwhy are they āflexān on youā? I laughed and said something of the effect about them having...
Iām trying to remove my interior door panel to try and track down a noise. But Iām having a problem with the screw behind the door lever. Not the two screws that are in the door handle that you pull the door shut with, but the door lever that you open the door with. The single little screw...
Iām trying to remove my interior door panel. But Iām having a problem with the screw behind the door lever. Not the two screws that are in the door handle that you pull the door shut with, but the door lever that you open the door with. The single little screw behind a little plastic square...
So Iām trying to decide on which direction to go for a street driven car to gain more turn in responsiveness.
what is the most effective route?
springs, sways, lower control arms with alignment? Can an alignment with stock suspension do it?
This is weird. I get in the car in the morning, start it and click the windshield wipers once or twice to get the dew off the windshield and I get this ābumpā in my brake pedal on each of the wipes.
if I keep the wipers going the ābumpā goes away.
WTH?
Try to do a simple oil change. Pull in off the engine cover and the back left boss broke on the what appears to be a cam cover!!
itās barely holding on. Does this open up to the engine?!
what do I do now? Try to glue it? With what. Not sure this would be covered by warranty!
Damn; damn, damn!!
So you know the cover that you have to pop off on the door handle to get to the two torx screws to remove the door. I popped mine off and two clips broke. I need to get another. What part number is this in the drivers side.
Ok, there is just too much info out there and Iām now throughly confused.
I have a 2020, stock, I just want to tune it With a basic tune to bump the power with 93 octane.
how do I do this? Do I have to have my ecu unlocked Before I tune?
how is this done, no one around my parts can tune these...
I got this sound coming from my door, its hard to explain, like the sound a single pill makes when it hits the plastic cap in a pill bottle. It happens once, not really a rattle, but a single āclickā (though itās not a click) when I go over smooth undulations in the road. Driving me crazy but I...
Iām getting new wheels so I will need new TPMS on my new wheels. Can I not just reuse the ones I have on my existing wheels and have them re-mount them to the new wheels? Also if this is done Iām assuming that each monitor needs to be located on the same wheel side it came from correct...
Iām looking for an ABS thin front splitter to supplement the OEM lip. I donāt like how the shark fins on either side of the front lip start above the bottom of the bumper cover. I donāt want a large protruding lip or additional fins either.
Anybody got any thoughts here.
40% reduction in Toyota production
If Iām wrong, you can blame my wife, she was reading me this so I donāt know the source. But assuming itās true would this include Supraās? I know Supras are built with Z4ās so IDK.
Iām from Louisiana and I can tell you for sure there will be people needing...
So I had my car set so that when I open the door after it was turned off the radio would turn off when my door opened. The other day my wife gets in the car as a passenger and now after that the only time the radio turns off is it her door is opened not mine. How Do I make it so that when my...
I tried posting this in the tech forum to no avail. So Iāll post here.
When I set up BimmerCode I set it up as a āSupraā not a Z4.
Iāve read there are more options under the z4 model.
how do I change to a z4 from a Supra setting and will I have to recode my current settings I have under Supra?
Trying to quiet down some snap joints on the plastic trim where it connects to other plastic trim. Whatās the best, longest lasting lube or trick to solve this condition in this application?