Sponsored

Search results

  1. Lets see those 18" wheel setups!

    I don't know if anyone noticed.. speed on speedometer is dependent on Overall Diameter of tire. Goal is to match the OD as close to OEM tires as much as possible and that is greatly effected by profile size (30, 35, 40, etc). It is also effected by construction of the tire as well. OD can be...
  2. IMSA Racing

    that was a good racing. a bit ambitious move but I think it was mostly fair. one of many things I didn't realized.. one LMP car spun and exited backward on pit exit even before race begun. :D
  3. IMSA Racing

    entire 24 hour was published by IMSA.
  4. IMSA Racing

    here's short version. 2022 Rolex 24 at Daytona | EXTENDED HIGHLIGHTS | 1/30/22 | Motorsports on NBC need to play on youtube..
  5. IMSA Racing

    watching this guy. :D
  6. IMSA Racing

    not rolex 24 but one of support race. this is a good race to watch.
  7. IMSA Racing

    for me, looks like only NBC & USA will cover few hours of race..
  8. Installing Tomei Type D Exhaust tomorrow. Any tips?

    you may already know... you could use lubricant or WD-40 for rubber packing. also, when I had to lower the subframe, I had to take muffler out of retainers off the rubber packing but that would have stressed connectors of downpipe and other components connect to it. I used wire hangers to...
  9. GR Supra Parts Introductions - formerly "This STB intrigues me."

    This is not specific to Supra but... Aero Stabilizing Body Coat seriously? a body spray that can help Aero Stabilization?
  10. Any Lightweight Black Wheels I Can Throw Stock Tires On?

    take a look at APEX. https://www.supramkv.com/threads/%E2%96%BA-apex-18x10-et30-technical-notes-tire-fitment-and-more.10958/
  11. 2021 F1 season prediction Challenge! - With Prize From APEX Race Parts!

    while waiting for 2022 f1 season to begin.. Formula E.
  12. Resetting Service Lights - Brake Pad, Oil, & ETC. (CBS)

    I was able to reset my brake using menu when it was around 8~9,000 miles.
  13. Scraped in parking lot. Touch up or body shop?

    Just an FYI. If you want to wrap it, you need to fix this before wrapping it. - not just touchup, full sanding/repaint. Wrap is so thin that if you wrap over the surface with paint chip, it will emboss and further more, it will have more chance to trap air/moisture that will ruin the wrap and...
  14. My Pewter Supra Build Log

    At this point in time, not really. I am happy with current setup but I only had few track days with this setup. who knows what I will do at the end of 2022 season. :D
  15. My Pewter Supra Build Log

    I think it was about over 90 days. they got it "unexpectedly earlier" than original. ;)
  16. Scraped in parking lot. Touch up or body shop?

    It's a sore thumb. but that is what bumper cover is for.. putting on touchup will be like putting bandage over the thumb but at least will look better 50 yards away. however, it may happen again. unless you will be attending car show to compete, it will be better to touch up for now and when...
  17. Engine swap b48 to b58

    yes. like others said, in terms of cost, not worth it unless you have opportunity like you blew your 2.0 and need to replace it or something like that.. Just the cost of used B58, ECU, perhaps transmission will be close to difference of cost between 2.0 & 3.0 before labor. And then you might...
  18. TPMS for the Supra

    Car Only reads 433mhz. 01 & 02 both emit 433Mhz signal. only 01 emits extra frequency - 315 mhz, I think - which is ignored by car. I used both 01 & 02 and worked the same. see below for more info. https://www.supramkv.com/threads/tpms-for-the-supra.2181/post-111029
  19. 2021 F1 season prediction Challenge! - With Prize From APEX Race Parts!

    videos from Formula 1 channel in youtube does not show on link.. I guess this sums up "Turbo Hybrid Era".
  20. â–ş APEX 18x10 ET30 Technical Notes: Tire Fitment and More

    I think Stock height is almost right on on streets of NY/NJ area.. it could be higher in this area but that would be SUV height.. :( If I could, most aggressive height I'd lower is, 1/2" but no one makes that setup..





Top