Search results

Verus diffuser and Cusco tow hook The diffuser needed some modification in order to fit with the Milltek exhaust.

It works just as well as any other car I've driven that's equipped with LED Matrix, primarily Tesla 3/Y. You can notice the light pattern adjusting when driving slowly through neighborhoods at night. It focus more light into corners and toward the sides of the road at lower speeds. It also...

The fitment was 100% perfect—no drilling or modifications were needed, as it uses the preexisting screws and push tabs located under the OEM lip. I ordered both the front lip and rear wing spoiler from RHDJapan. The total cost was approximately 171,000 JPY, including DHL shipping. I believe...

I usually work weekends, but had time off today, so on with the Max Orido lip! Boss is skeptical, but happy it colormatches his toy.

Just checked, it's ABS resin/plastic. Even say so on a lot of sites that sells Max Orido styling.

I can check when I get home from work. Pretty sure there was a sticker on one of the parts that said ABS.

I ordered it from RHDJapan. Took about 4-5 weeks.

No sure. Always thought they where ABS? Anyway, fitment is 100% spot on. ABS is so much easier to work with. Will be fitting the front lip w/end fins on Sunday.

ABS plastic

Yup, comes painted in black matte that matches the other black parts.

Installed Max Orido spoiler. IMO, the most OEM looking spoiler on the market for these cars.

I was recommended to use a longer belt when I bought my ATI dampener, so I did. The longer belt did not feel loose when I slipped it on, it was a tight fit. I imagine if I reused the oem belt, I would have to pry it on and it would put more stress on the belt tensioner.

Deleting the OPF normaly causes CEL, as the back pressure would be out of normal reading range. It's easy to disable in MHD/BM3/Ecutek. But for people still running stock DME tune, a "OPF delete harness" is an option. It's basically just a small harness piece with a resistor to fool the sensor...

That's correct. We have an extra line right after the cat on the downpipe that connect's to a back pressure sensor located on the valve cover. Only found on EU and in some asian countries AFAIK.

Add the new card in Google Play or Apple Pay depending on what OS you want to run it on.

Ah no, automatic only for now

Flashing the transmission with XHP will bring back the upshift burp that our EU spec'd supra's are missing from stock. It helps a little :)

Yes, it works perfectly now, after I installed a new harmoic balancer. I made a thread about this here: https://www.supramkv.com/threads/slipping-serpentine-belt-broken-crank-pulley-harmonic-damper.22242/ But have you checked the coolant level yet? Might be that it is low on coolant, but that...

I had a similar problem with my 2020. Smoke from the engine bay when revving, overheat and "generator not charging" warning. Turned out to be the serpentine belt ring on the harmonic balancer had failed and was grinding rubber, hence causing the smoke, and overheat since the waterpump no longer...

The season started early this year, I pulled the car out of winter storage about 6 weeks ago, usually we have snow until the end of April. Been to several C&C's already, and have just been enjoying driving the car. Some more parts have been fitted. Verus Engineering caps, heat shield and a...