► Official APEX Wheels Showroom Gallery Thread

[FLtrackdays]

Absolutely loving the look of these wheels. Helps my car is the same color. I've been "wheel" shopping for almost a yr now, and this is the 1st setup i've seen that really caught my eye, that wasn't going to put me in the grave price wise. do you offer a tire package as well? are you currently back ordered? I have (not installed) HKS Hypermaxx adjustable springs. have you seen any issues with this setup on those springs?

My clearance was tight up front so I got 10mm spacers all around. Running on 18 inch Apex wheels with Maxxis 275/35 tires.. Looks and feels great on track!

Sponsored

 

[3TMagnetMan]

An SM-10 Group Buy is definitely in the works! The EC-7Rs are already live on our site for pre-orders as they will be arriving first in limited quantities but we will be launching a full group buy for the SM-10s once they arrive with pricing and specification details!

APEX SM-10 in Satin Bronze
F: 19x9.5” ET25 - 275/30-19 Michelin Pilot Sport 4S
R. 19x11” ET40 - 305/30-19 Michelin Pilot Sport 4S
Megan Racing Coilovers

-Tom

With these wheels and tires sizes no need for wheel spacers????

 

[Karamk5]

@TNZupra's new setup:

Wheels: VS-5RS in Satin Black
Front: 18x10 ET30
Rear: 18x11 ET40
Tires: RE71RS
Front: 275/35-18
Rear: 295/35-18
Brakes: Stock
Suspension: RSR Down Ti-2000 Springs


​

I just want to make sure, is this the Rsr down suspension (0.4-0.6 lower in the front)? Or is it the super down, because the figment looks perfect

 

[APEXRaceParts]

With these wheels and tires sizes no need for wheel spacers????

For these wheels the fitment can be very tire dependent. A tire like 275/30-19 Pilot Sport 4S can fit, whereas something like a 275/30-19 RT660 can rub since they run a lot wider.

Hope that clarifies things for you.

 

[tanabersx]

I love my Apex wheels and would like to get a “drag” set for the rears. Do you recommend the 18x11 wheels for street drag racing in Mexico? Not really drag racing just want to put some MT ET STREET R on the rears for better grip. Currently running SM-10’s 19x11 in the back with Toyo R888R. My other option is some Welds or Belak. TIA

 

[brr.andon]

Had these for a few months now, lovin' em.

APEX VS-5RS in satin bronze, on stock suspension and brakes

Fronts: 19x9.5 +25, Michelin Pilot Sport 4 S 265/35/19
Rears: 19x11 +40, Michelin Pilot Sport 4 S 295/35/19

They are ceramic coated, so there is a slight shine to them here.

Love this look I might have to go with something like this!

 

[tanabersx]

I love my Apex wheels and would like to get a “drag” set for the rears. Do you recommend the 18x11 wheels for street drag racing in Mexico? Not really drag racing just want to put some MT ET STREET R on the rears for better grip. Currently running SM-10’s 19x11 in the back with Toyo R888R. My other option is some Welds or Belak. TIA

No suggestion from my Apex friends?

 

[FLtrackdays]

Love my Phantom! But did finally get PPF and ceramic coat being a matte color and tracking the out of her. Everyone at the track assumes or asks if I wrapped the car

 

[APEXRaceParts]

I love my Apex wheels and would like to get a “drag” set for the rears. Do you recommend the 18x11 wheels for street drag racing in Mexico? Not really drag racing just want to put some MT ET STREET R on the rears for better grip. Currently running SM-10’s 19x11 in the back with Toyo R888R. My other option is some Welds or Belak. TIA

No suggestion from my Apex friends?

Apologies for the delay!

Our 18x11" ET40 should be able to mount either of the 18" ET Street R tire options no problem. Simply mounting the tire is only part of the equation though. Both of the 18" sizes that Mickey Thompson offers for this tire look like they could be either too wide or too tall.

In our lineup the 18x11" ET40 would be your best bet, but we couldn't guarantee that you'd be able to run the tire you want without a ton of rubbing.

Hope that clears things up a bit.

 

[tanabersx]

Apologies for the delay!

Our 18x11" ET40 should be able to mount either of the 18" ET Street R tire options no problem. Simply mounting the tire is only part of the equation though. Both of the 18" sizes that Mickey Thompson offers for this tire look like they could be either too wide or too tall.

In our lineup the 18x11" ET40 would be your best bet, but we couldn't guarantee that you'd be able to run the tire you want without a ton of rubbing.

Hope that clears things up a bit.

Yes it does and thanks for the reply! I really had not checked MT ET R's in 18 and there is only two sizes!! And after checking, most brands are really limited in 18" drag tires. No wonder everybody goes to 17". I just hate the look on those 17" drag wheel options

 

[TNZupra]

I just want to make sure, is this the Rsr down suspension (0.4-0.6 lower in the front)? Or is it the super down, because the figment looks perfect

Just the down, I live in the country and don’t want to scrape

 

[Yalemaier]

Thank you Apex! Totally digging the square track setup. Ready to go play this weekend.

Nice! What tire size are you running?

 

[FLtrackdays]

275/35-18 Maxxis Victra RC-1s…. absolutely LOVE them. My next set is sitting in my garage at home. Stickiest bang for the buck imo. They last a long time too. Another plus+++

 

[glibCthulhu]

Can’t say enough good things about these satin bronze SM-10’s.

Front - 19x9.5 ET25
Rear - 19x11 ET40
Wrapped in Continental Extremecontact 02’s.

 

[Erty]

When Apex had 3 out of the 4 wheels in stock that you wanted so now you have to wait until best case scenario march...

Sponsored