Active Autowerke Charge Pipe Toyota Supra B58 **NEW PRODUCT**

[Extreme Power House]

Active Autowerke is familiar with some of the issues that 2012 and newer N55 BMW 335i, 435i, M235i and M2 owners experience even running with the factory BMW boost.

The BMW B58 utilizes an all plastic construction for the factory charge pipe.
This charge pipe will eventually break, although much better than the N55. Whenever the factory charge pipe break at the plastic seam, the engine immediately senses a huge vacuum leak where the engine ECU counters by sending the engine into LIMP MODE condition. Usually, the car's performance will feel diminished and lack luster as if running without a proper firing cylinder.

The Active Autowerke B58 G-body Charge Pipe is a designated product designed from inception to cure and eliminate this problem on your BMW.
Constructed from all aluminum makes this charge pipe almost indestructible.
The connection to the throttle body is a CNC machined part to duplicate the factory fit as well making a tight, reliable seal.

Owners of BMW with the B58 engine understands that additional power can be reliably maintained with the use of Water/Methanol injection as an added feature.

The Active Autowerke B58 Charge Pipe has a proper provision for this specific application. A boss with two separate ports are provided upstream where the injected mix of water/methanol can properly atomize before entering the engine. The thread depths for the water/methanol nozzles are also checked to allow for a proper spray pattern without hitting the inside walls of the threaded holes.
Key Features:

Specific design to correct a problem
Consistent diameter tubing for increased performance
Increased throttle response and decrease throttle lag
CNC machined throttle housing for a proper seal
Retains factory BMW O-Ring seal
Provision of raised boss for 2 Water/Methanol nozzles
BLACK powder coated for that OEM look
High quality silicone couplers and stainless clamps are included

NOTE:

The factory throttle clip and O-ring are not included with the B58 Charge Pipe

****NOT COMPATIBLE WITH XI MODELS

Sponsored

 

[NewGuy]

Hi, is this available for local pick up?

 

[Axix23]

Do you offer in different colors?

 

[Extreme Power House]

Hi, is this available for local pick up?

It ships directly from FL to you, free shipping.

Active Autowerke just received the shipment, it has not yet been sent to dealers.

Do you offer in different colors?

Only in black, but you can powder coated locally.
It'll cost ~ $50

 

[NewGuy]

@Extreme Power House Thank you for the info. I went ahead and ordered one. Free shipping and a discount. Seemed too good to pass.

 

[Axix23]

It ships directly from FL to you, free shipping.

Active Autowerke just received the shipment, it has not yet been sent to dealers.



Only in black, but you can powder coated locally.
It'll cost ~ $50

what about raw polished pipes?

 

[Extreme Power House]

@Extreme Power House Thank you for the info. I went ahead and ordered one. Free shipping and a discount. Seemed too good to pass.

Congrats!!

 

[Extreme Power House]

what about raw polished pipes?

??

 

[Extreme Power House]

More pictures

More pictures

 

[underdonk]

Now trust me, I'm all for spending money on stuff, but I thought the general consensus on these components from any manufacturer is that they don't really provide any benefit and that people keep popping the silicone coupler who are running boost over stock levels? Can anyone who is running this kit from any manufacturer talk about benefits besides looking pretty (which these certainly do)?

 

[zrk]

Now trust me, I'm all for spending money on stuff, but I thought the general consensus on these components from any manufacturer is that they don't really provide any benefit and that people keep popping the silicone coupler who are running boost over stock levels? Can anyone who is running this kit from any manufacturer talk about benefits besides looking pretty (which these certainly do)?

If you run boost over stock levels you'll eventually need a charge pipe. If you run meth or nitrous, you need a charge pipe.

 

[underdonk]

If you run boost over stock levels you'll eventually need a charge pipe. If you run meth or nitrous, you need a charge pipe.

Yeah I went back and read the description and realized these have the kit for meth or nitrous. When you say "over stock levels" what are your thoughts on this? I run a JB+ cranked up to max. This isn't much. Are my stock components going to fail at some point? I know we don't have any data really, at this point, for any of this, just looking for your opinion.

 

[zrk]

Yeah I went back and read the description and realized these have the kit for meth or nitrous. When you say "over stock levels" what are your thoughts on this? I run a JB+ cranked up to max. This isn't much. Are my stock components going to fail at some point? I know we don't have any data really, at this point, for any of this, just looking for your opinion.

Na, you're fine. You'll know if it cracks. You'll hit limp mode real quick. I have a spare stocker if you need it

 

[Extreme Power House]

the charge pipe is not prone to failure, but if your car is tuned it's still a good idea to upgrade it as the stock one will eventually fail.

If you are running methanol injection, this charge pipe is a mandatory upgrade

 

[underdonk]

Na, you're fine. You'll know if it cracks. You'll hit limp mode real quick. I have a spare stocker if you need it

? You da man. It's one of those components that I've thought about just getting and doing so when I am eventually able to tune my untunable '21 it'll be taken care of. I'm glad that AA released a part - the quality of their downpipe is certainly excellent. Just want to put my money elsewhere in the car currently.

Sponsored