Azian6er
Well-Known Member
- Thread starter
- #1
Chassis Stabilization Error / Rear Differential lock reduced.
I just finished up install on my Driveshaft Shop axles, Pure850, and JRZ coilovers + RSR Cancellers. The battery was connected for all these installs. Long story short, upon completion, I was hit with a number of error codes.
1.) Chassis Stabilization (reduced driving stability)
2.) Rear differential lock reduced
3.) Driver Assistance support reduced
4.) Parking Assistance malfunction
I have done my research and it seems that a lot of people have had issues after a coilover install either relating to the ride height leveling sensors OR the dynamic suspension system.
I have checked every connection to the rsr cancellers to ensure no pins are bent and the clips are securely fastened. I have also made sure that the ride height leveling sensors are parallel with the ground at ride height. I have also reflashed the dme with ecutek 3 times with no avail. I also have had the car on battery charger for 3 days straight. I have also tried unplugging battery for 30 mins and then reconnecting. I am stumped.
I have heard others say to drive and it will sort itself out. I drove about 75 miles yesterday and all the errors remain still.
I have been trying to diagnose this issue along side Jordan Best because he recently had the chassis stability error pop up after his JRZ install as well.
If anyone can point us in the right direction we would greatly appreciate any help!
I just finished up install on my Driveshaft Shop axles, Pure850, and JRZ coilovers + RSR Cancellers. The battery was connected for all these installs. Long story short, upon completion, I was hit with a number of error codes.
1.) Chassis Stabilization (reduced driving stability)
2.) Rear differential lock reduced
3.) Driver Assistance support reduced
4.) Parking Assistance malfunction
I have done my research and it seems that a lot of people have had issues after a coilover install either relating to the ride height leveling sensors OR the dynamic suspension system.
I have checked every connection to the rsr cancellers to ensure no pins are bent and the clips are securely fastened. I have also made sure that the ride height leveling sensors are parallel with the ground at ride height. I have also reflashed the dme with ecutek 3 times with no avail. I also have had the car on battery charger for 3 days straight. I have also tried unplugging battery for 30 mins and then reconnecting. I am stumped.
I have heard others say to drive and it will sort itself out. I drove about 75 miles yesterday and all the errors remain still.
I have been trying to diagnose this issue along side Jordan Best because he recently had the chassis stability error pop up after his JRZ install as well.
If anyone can point us in the right direction we would greatly appreciate any help!
Sponsored
Last edited: