2021Supra
Well-Known Member
- Thread starter
- #1
I am changing out my existing exhaust system that did not have the option for the actuator to work. I zip tied it up inside the back bumper. The new HKS system has arrived and now I am having trouble lining up the actuator to the new exhaust system. The actuator is working as it should, from what I can tell. The issue that I am having, no matter what mode it's in normal or sport, the actuator will turn but not turn to the correct position to align perfectly to the HKS spring actuator.
I did also pull the fuse when the car was in sport mode to eliminate any excessive open and closes of the valve actuator while not in use. I put the fuse back in and it works, but for the life of me, I can't get it to line up to install the three bolts.
Has anyone experienced this and have a solution? I do not want to force the actuator tab with a flathead screwdriver to align it up perfectly.
Am I over thinking this? Really no information out there that I have found. Any help would be appreciated.
I did also pull the fuse when the car was in sport mode to eliminate any excessive open and closes of the valve actuator while not in use. I put the fuse back in and it works, but for the life of me, I can't get it to line up to install the three bolts.
Has anyone experienced this and have a solution? I do not want to force the actuator tab with a flathead screwdriver to align it up perfectly.
Am I over thinking this? Really no information out there that I have found. Any help would be appreciated.
Sponsored