Sponsored

Installed AWE Touring Catback!!!

drave199

Well-Known Member
Joined
Mar 3, 2021
Threads
12
Messages
97
Reaction score
31
Location
Nevada
Car(s)
2021 Supra 3.0, 2016 Ram Diesel
And here are some pictures of the AWE exhaust during installation.


AWE bracket.jpg
AWE downpipe connection.jpg
AWE exhaust 1.jpg
AWE exhaust 2.jpg
AWE Exhaust 3.jpg
AWE exhaust 4.jpg
AWE exhaust 5.jpg
AWE exhaust laid out.jpg
Sorry for the response to a really old thread but I have a question. I just installed my non resonated exhaust. Did the section that comes off the down pipe to the mid pipe (the part that starts as one pipe then splits) did it sit a couple inches lower than the bottom of the car? Mine does, it isn’t as flush as the stock exhaust was and it makes me a little nervous since I’m also installing lower springs lol. Thanks for the help.
Sponsored

 

Dannyvandelft

Well-Known Member
First Name
Danny
Joined
Jan 15, 2019
Threads
17
Messages
3,154
Reaction score
4,599
Location
44133
Car(s)
Ordered A91 edition Supra
Sorry for the response to a really old thread but I have a question. I just installed my non resonated exhaust. Did the section that comes off the down pipe to the mid pipe (the part that starts as one pipe then splits) did it sit a couple inches lower than the bottom of the car? Mine does, it isn’t as flush as the stock exhaust was and it makes me a little nervous since I’m also installing lower springs lol. Thanks for the help.
You didn't install it correctly. You can twist the pipe up so it sits flush. Install the whole thing loosely, then from front to back twist everything up into the tunnel and tighten.
 

drave199

Well-Known Member
Joined
Mar 3, 2021
Threads
12
Messages
97
Reaction score
31
Location
Nevada
Car(s)
2021 Supra 3.0, 2016 Ram Diesel
You didn't install it correctly. You can twist the pipe up so it sits flush. Install the whole thing loosely, then from front to back twist everything up into the tunnel and tighten.
Yeah I think I need to adjust it again. It’s just such a pita lol. Especially doing it on your back.
Another question, did you have some condensation leak from the joints (behind the clamps) while running as I do? AWE said it’s normal but not sure. I know everything is tight and torqued.
 

freeform911

Well-Known Member
First Name
Steve
Joined
Nov 21, 2020
Threads
18
Messages
905
Reaction score
870
Location
Beaufort South Carolina
Car(s)
2021 a91 edition Supra 2016 Lexus rc f BMW 435I
Yeah I think I need to adjust it again. It’s just such a pita lol. Especially doing it on your back.
Another question, did you have some condensation leak from the joints (behind the clamps) while running as I do? AWE said it’s normal but not sure. I know everything is tight and torqued.
I have condensation drip from 1 of my joint (Borla system)...
I'm guessing it's normal?

Steve
Sponsored

 
 








Top