Then you'll have a hard time finding anything viable-custom work included. The rod of the shifter is too large in diameter for what you want and doesn't taper down in size until you get to where the shift knob sits.I’m not looking to replace the assembly, just replace the leather boot with a gated shifter
Fair point, I probably should’ve taken a look at the oem assembly before asking. No point in just getting a gate when the rod looks the way it does from factory. Looks like I may go the short shifter route afterall. Thank you for the replyThen you'll have a hard time finding anything viable-custom work included. The rod of the shifter is too large in diameter for what you want and doesn't taper down in size until you get to where the shift knob sits.