Do you have a 6/20 ecu date? I have a 6/6/20 and have been told by everyone that it canāt be tuned.Seems like the car can be tuned. I will be taking it over to National Speed to have it looked at.
6/6/20. They said that they are able to do it. They will be calling me back with a quote for everything that I listed for them to do. I'll make sure to get clarification and what they have as a cut off date.Do you have a 6/20 ecu date? I have a 6/6/20 and have been told by everyone that it canāt be tuned.
Wow, this would be insane if true. Keep us updated!6/6/20. They said that they are able to do it. They will be calling me back with a quote for everything that I listed for them to do. I'll make sure to get clarification and what they have as a cut off date.
I've had other shops tell me the same thing, but they never even attempted to check if it could be unlocked.
The pipes look even better right now! Nice to have a bit of shiny accents on your carFinished polishing as best as I could. Everything has been reinstalled. So much work for stuff that is pretty much hidden.
Before:
After:
Installed:
Car goes into the shop tomorrow for downpipe, exhaust, and other goodies.
but do you got ..***Updated 07/16/2021***
April Snapshot:
View attachment 41439 View attachment 41440 View attachment 41441 View attachment 47352
Parts Installed:
- Engine/Intake/Exhaust
- Verus Air Oil Separator (Raw)
- Verus AOS Drain/Crank Case Vent line Kit
- Verus 6 port Heat Shield (Black)
- AMS Charge Pipe
- MST V2 Intake System
- Remark Catback Exhaust
- AA Catted Downpipe
- Suspension/Brakes
- RS*R Best-i Active Coilover
- Visconti Ride Height Sensor Bracket Upgrade
- R1 Concepts Big Brake Kit- 6 piston front and 6 piston rear with E-brake
- 13 and 15 mm Spacers (To hold me over until my wheels get here)
- Cusco Strut Brace (The Blue will be painted black.)
- MRG 82mm Stud Conversion Kit
- Customized Allstar Performance Spring Perch Spacer
- Fueling/Tuning
- Drivetrain
- Aero/Interior & Exterior Aesthetics
- Verus Washer Fluid Cap (Raw)
- Verus Engine Bay Cap Kit (Raw)
- Verus Gas Cap (Black)
- Verus A/C Cap Kit (Black)
- AMS Engine cover
- AMS ECU cover
- AutoTecknic Carbon Mirror Cover (Will be painted Matte Clear)
- AutoTecknic Paddle Shifters
- Full Alcantara Steering Wheel with A91 stitching from ECS
Current parts that I have on hand:
- Zl1 Rock Guards
- P2uned Door Garnish
- Titanium Works Supra Logo
- STREETHUNTER Wing
- EOS Intake/Intercooler Manifold
- SPL Front Lower Control Arm
- Visconti Tuning STG1 Fuel System Upgrade
- Visconti Tuning Sequential Port Injection Kit
- Visconti Flex Fuel Kit
- ID1050x injectors
- ECU Unlock
- EcuTek Custom Tuning Credits
Items that are currently on order:
- Seibon MB Diffuser
- Seibon MB Skirts
- Seibon MB Front Lip
- Seibon TSII Hood
- 20" SSR SP1 Wheels (Glossblack barrel, matte black face, Silver hardware)
- 20x9.5 and 20x10.5
- Michelin PS4S Tires
- 275/30 and 305/30
- INGS +1 N-Spec Front Aero Fenders
- Cusco Trunk Brace
Future orders
- Pure 850 Rebuild
- Pure Stage 1 Transmission and Torque Converter Rebuild
- Guibo, Driveshaft, and Axle upgrades
- More SPL Suspension components
AH YES. Crackles and spool soundsExhaust soundclip.
In a week or so I'll find out if this car will be tunable or not.
The only thing I had to do was adjust one of the rear hangers a little bit to get the tips to level out a bit. My wife couldn't notice it lol. But I did. It only took a $2 hose/worm clamp wrapped around the rubber hanger to adjust the Tip.The Remark sounds incredible with the AA catted downpipe. I have the AA downpipe and thinking of going this route since itās sporty without being obnoxious with the valve open.
Any drawbacks that you can think of so far?