No Boost

[Axix23]

I have the FTP charge pipe, do you think this one would work and is longer? I have been pushing it close on space to clamp onto.

yes, it’s a generic coupler but way longer than the one that comes with the charge pipes which provides more clamping area. The Vibrant material seems to be better as well.
Here is the comparison.

Sponsored

 

[Axix23]

No boost leaks with that setup. If I was running 30 psi I would run that dual clamp system.

For now the P2uned version gets the job done.

-RJM

i over did mine. Lol yours works fine I bet!!

 

[hwnstyle21]

Ok quick update.
Installed the Vibrant coupler and double clamped it just to be sure.
Car drove fine but then no boost again.
Compiled some driving logs and it looks like it’s an issue with the Reflex /PI setup. Throws the PI Diagnostic Flag: 1048576 and 1048580 (PI Effective Pulsewidth Target is less than minimum allowed) & (Engine Load below activation threshold)
Can this cause the car to go into limp mode? There’s no codes just no power and I don’t have the Botti tune files to reflash. ?

 

[zrk]

Ok quick update.
Installed the Vibrant coupler and double clamped it just to be sure.
Car drove fine but then no boost again.
Compiled some driving logs and it looks like it’s an issue with the Reflex /PI setup. Throws the PI Diagnostic Flag: 1048576 and 1048580 (PI Effective Pulsewidth Target is less than minimum allowed) & (Engine Load below activation threshold)
Can this cause the car to go into limp mode? There’s no codes just no power and I don’t have the Botti tune files to reflash. ?

Those aren't PI errors codes, they're just diagnostic codes. PI sounds like it was working fine, you just didn't need it according to your parameters. Do you have a log?

Perfectly normal log from me a while back: https://datazap.me/u/zrk/93-season-closer-ii?log=0&data=4-18-51&solo=51

 

[hwnstyle21]

I just logged while I was driving (no pulls or anything) so they’re prob junk but here ya go
BOOST
NO BOOST

 

[zrk]

I just logged while I was driving (no pulls or anything) so they’re prob junk but here ya go
BOOST
NO BOOST

Oh wow. it is literally zero boost.

 

[zrk]

Something is really weird. Maybe mechanically, I'd call Mikey and have him take a look at this. Highly unlikely it's in the tune. It's literally reading 0psi across the board.

 

[hwnstyle21]

Thanks for taking a look. Ive gone through the channels but he’s enjoying some holiday time off. Hopefully he’ll be able to get to it soon.

 

[zrk]

Thanks for taking a look. Ive gone through the channels but he’s enjoying some holiday time off. Hopefully he’ll be able to get to it soon.

Haha, he sure is. Living it up on the beach.

 

[murasaki_supra]

Hey im having a problem I just got this pure 900 installed and is not reading any boost, im thinking is the sensor that's on top of the charge pipe just order it, but does anyone else have this problem, im using bm3 and I heard bm3 could have some software issues and not read it maybe, idk any thoughts?

Sponsored