Pics & Vids of Supra with aftermarket wheels

[Vegas Supra]

No rubbing at all. I can check on offset -- they were custom machined blanks so they would fit perfectly, even as the Michelins are a few milimeters wider than most other tires in same size.

I assume your on stock suspension still?

 

[ccdan]

Car was dirty, but wanted to get these out as people were asking. 20x10.5 in rear, 20x9 front. And we fit 305/30-20 in rear.

One of the best looking 20" setups I've seen done on the car to date! Still unsure of how the 20" fronts look in the wheel well but can get down with the 20" rears.

 

[LS3Twins]

These will be installed next week and will upload pics as soon as they are on.

BC Forged MLE10's
19x9.5
19x11
Gloss Black Barrel with Matte Center
Titanium Hardware

 

[Vegas Supra]

These will be installed next week and will upload pics as soon as they are on.

BC Forged MLE10's
19x9.5
19x11
Gloss Black Barrel with Matte Center
Titanium Hardware

What offset's tho? Strange no one is listing offsets,

 

[svtraid]

Stance SF03 Brushed Titanium
F: 20x10 +30 R: 20x11 +40
Michelin PS4S 265/30, 295/30
H&R Springs

 

[jm6k]

Stance SF03 Brushed Titanium
F: 20x10 R: 20x11
Michelin PS4S 265/30, 295/30
H&R Springs

Need more pictures of that. Looks great.

 

[svtraid]

Need more pictures of that. Looks great.

thx!

 

[svtraid]

a couple more...

 

[Titan Motorsports]

Realstreet and Induction have been running some Enkei 17" rears for a few weeks now but they weren't very good looking, didn't fit very well, and never had matching fronts. So not the first but these Forgeline's look great as a drag pack.

Maybe Ashley at Titan can chime in but based on outer diameter measurements it seems with an extended drop center wheel it might be possible to run 17's to clear the OEM calipers. The other thing thats hard to tell is they are narrow wheels kicked out flush to the fenders so the caliper might not even sit inside the wheels.

Our drag pack is the following:
17x4.5" fronts with 17x10.5" rears

They were custom spec for our MKV. Clearings the stock calipers and our KW V3's without issue. No modification required for this fitment and they even clear when the car squats on a launch at the track.

 

[LS3Twins]

What offset's tho? Strange no one is listing offsets,

It's not a conspiracy or anything. Here's my specific setup, I wanted a certain size and offset so mine is different than the others you might have seen so far.

 

[jm6k]

It's not a conspiracy or anything. Here's my specific setup, I wanted a certain size and offset so mine is different than the others you might have seen so far.

Pretty sure this still doesn't tell us the offset. I'm beginning to think it is a conspiracy.

 

[HATED1]

Everyone is keeping their offset information in a room in Area 51.

 

[LS3Twins]

Pretty sure this still doesn't tell us the offset. I'm beginning to think it is a conspiracy.

Haha. I went through so many changes on them to get it just right I'm not even sure what offset they ended up at. I emailed Dan at BC Forged and he's going to send me my final specs and I'll make sure to update it here. Sorry I don't have them handy but it definitely seems like I'm hiding it but I'm not. I will definitely let you know.

 

[Vegas Supra]

20" HRE FF11 Flow Form in Tarmac

 

[GirlRepellent]

Dang man! Your Zupra looks great!!