cntrvslbrs
Well-Known Member
- First Name
- Ev
- Joined
- Jul 7, 2020
- Threads
- 25
- Messages
- 206
- Reaction score
- 190
- Location
- NJ
- Website
- www.vangloriousmusic.com
- Car(s)
- 21' Supra 3.0, 23' Z Perf, 14' Toyota 86
- Thread starter
- #1
Long story short - I went Pure800 and wanted to re-tune with my tuner.
He sent me a base map which seemed to have been working. (No CEL)
(Can Error and CanBUS status both read 0).
I did a pull and sent him the log and low and behold, PI isn't firing.
My tuner believes the box may not be programmed correctly.
Spoke to Jake over at Motiv and he recommended I be on the latest firmware.
I have Visconti's Plug & Play Reflex+.
I was running a v44 .bin file before I followed Jake's advice.
Just checking to see if I need specific sequence or files or am I missing something.
Injector Size : 1050cc (IDX)
RaceROM Version - 51575
Current Reflex+ files: v7.3 .hex, V6.2x_ecutek_plus_b58supra_12192023.bin, V7.00_Reflex+_XDF.xdf, and V6.2x_ADX_ALL.adx.
Anybody have this issue before?
He sent me a base map which seemed to have been working. (No CEL)
(Can Error and CanBUS status both read 0).
I did a pull and sent him the log and low and behold, PI isn't firing.
My tuner believes the box may not be programmed correctly.
Spoke to Jake over at Motiv and he recommended I be on the latest firmware.
I have Visconti's Plug & Play Reflex+.
I was running a v44 .bin file before I followed Jake's advice.
Just checking to see if I need specific sequence or files or am I missing something.
Injector Size : 1050cc (IDX)
RaceROM Version - 51575
Current Reflex+ files: v7.3 .hex, V6.2x_ecutek_plus_b58supra_12192023.bin, V7.00_Reflex+_XDF.xdf, and V6.2x_ADX_ALL.adx.
Anybody have this issue before?
Sponsored
