Replacing Center Caps

[Matthewstorm]

I understand the center caps are 56mm. Does the wheel need to be removed to take the caps off? Thanks.

Sponsored

 

[Andrew4Supra]

With a very thin plastic trim tool you can catch the edge of the cap to pop it out. Sometime you can also use a grocery store rewards card (stiff but flexible enough to curve). But in some cases you’ll likely have to pop it from the backside of the wheel.

 

[zrk]

With a very thin plastic trim tool you can catch the edge of the cap to pop it out. Sometime you can also use a grocery store rewards card (stiff but flexible enough to curve). But in some cases you’ll likely have to pop it from the backside of the wheel.

I just used needle nose pliers, wrapped in a microfiber, and yank on the Toyota logo.

 

[YOTA_IL]

Just take the wheel off it takes 5 minute per wheel if you do not want to potentially damage anything on them. If you’re tossing the center caps in garbage then just yank away.

 

[Axix23]

Need to take them
Off to pop them out. If not, you could scratch or dent them by prying them out.
You could try the tape method to pull them out.

 

[Matthewstorm]

Thanks for the suggestions.

 

[zrk]

I just used needle nose pliers, wrapped in a microfiber, and yank on the Toyota logo.

And no, I didn't scratch anything.

 

[Matthewstorm]

And no, I didn't scratch anything.

Cool. Thnx.

Sponsored