What did you do to your Supra today?

jRuN

Well-Known Member
First Name
John
Joined
Dec 6, 2022
Threads
6
Messages
211
Reaction score
248
Location
Orlando
Car(s)
2022 Supra 3.0, 2017 Ram 1500 Sport
Bro this is literally the goal with mine too, even got the mkiv font for Supra on the back and removed the GR 😂 i ordered the exhaust direct from the Samson performance website, requested no burns on the titanium but you can customize that. Very deep and 2jz like along with AA catted downpipe. I am looking at removing the loud cold start thru tuning also, want to be mindful of neighbors!
I'm pretty sure we just became best friends based on this thread...
 

badwolfe

Well-Known Member
Joined
Sep 11, 2022
Threads
14
Messages
172
Reaction score
112
Location
NC
Car(s)
2021 A91, 2021 Jeep Gladiator
Best would be level. You can change the oil like me or get a lift. The most important thing is changing the oil and more often than less 👍
I have some wheel cribs and can get it up enough to get under it but it will be a hassle - like the thought of the lifts i've seen on the forum here but not sure if I want to invest at the moment.....
 

FLtrackdays

Well-Known Member
First Name
Mark
Joined
Mar 6, 2022
Threads
30
Messages
3,465
Reaction score
3,444
Location
the least restrictive State in the USA
Car(s)
2022 Supra 3.0, ND MX5 Club, VW GTI MK7.5
Out or interest, in the US would that get you a ticket if you were caught driving at night?
That’s what you call a dedicated track car. I can’t think of anywhere you can drive w/out lights in the US. My S2K didn’t have lights either but I did have a detachable light bar for night track events.

IMG_0266.jpeg
 

nosavingthrow

Well-Known Member
First Name
John
Joined
May 1, 2021
Threads
19
Messages
360
Reaction score
517
Location
Seattle, WA
Car(s)
2021 Supra 3.0 Premium, 2022 Mazda 3 Turbo
Unfortunately, upon pulling the trim off I didn't find any obvious culprit. I ended up just adding 1/4 inch foam to some of the contact points, taping down a wire and wrapping some of the metal clips with electrical tape to tighten things up. I'll make a thread in the Guides section later today with some pics and post a link to it here, in case what I did will help anyone else.
Better late than never, but here is a thread with some pics showing what I ended up doing to fix this issue.

https://www.supramkv.com/threads/fixed-my-door-rattle-buzzing.17802/
 

tub54500

Well-Known Member
Joined
Sep 26, 2022
Threads
4
Messages
145
Reaction score
104
Location
P
Car(s)
A91 MT
Installed eibach euro springs and spacers today! The box actually says for the Supra when it arrived. The lowered amount is just perfect! It’s not too low or high. It rides slightly stiffer than oem but still comfortable. The turns seems a little sharper as well! Overall very happy with this spring, just need to wait and get an alignment now. Also rubbing on my exhaust now over speed bumps but I’ll just adjust it when I do the Armytrix catless downpipe next 😈

IMG_2272.jpeg
 

SupraTR

Well-Known Member
First Name
Tanner
Joined
Feb 3, 2023
Threads
3
Messages
134
Reaction score
126
Location
Denver
Car(s)
'23 Supra 3.0 Premium; Mazda CX-5
Installed eibach euro springs and spacers today! The box actually says for the Supra when it arrived. The lowered amount is just perfect! It’s not too low or high. It rides slightly stiffer than oem but still comfortable. The turns seems a little sharper as well! Overall very happy with this spring, just need to wait and get an alignment now. Also rubbing on my exhaust now over speed bumps but I’ll just adjust it when I do the Armytrix catless downpipe next 😈
Looks perfect. I have the same ones in my garage and plan to install this weekend along with a downpipe. Or at least will get one of the two installed this weekend if I end up feeling lazy (or more realistically too many wife to-do's)
 

Rocksandblues

Well-Known Member
First Name
Bob
Joined
Sep 21, 2020
Threads
41
Messages
2,186
Reaction score
3,757
Location
Virginia
Car(s)
2021 Supra, e46 M3, diesel BMW e90, GL450
Installed eibach euro springs and spacers today! The box actually says for the Supra when it arrived. The lowered amount is just perfect! It’s not too low or high. It rides slightly stiffer than oem but still comfortable. The turns seems a little sharper as well! Overall very happy with this spring, just need to wait and get an alignment now. Also rubbing on my exhaust now over speed bumps but I’ll just adjust it when I do the Armytrix catless downpipe next 😈

IMG_2272.jpeg



Drive it for a couple weeks before alignment. Let them settle
 

frankenm

Well-Known Member
Joined
Dec 3, 2021
Threads
11
Messages
230
Reaction score
371
Location
CA
Car(s)
2021 Supra A91
Got new manifold installed finally I am so slow when it comes to building this car ... I want to install my carbon driveshaft but still have to change brakes and install vents going to willow springs in 2 weeks ... still no ecu ....
 

FuzzyRev

Well-Known Member
First Name
RT
Joined
Aug 4, 2021
Threads
4
Messages
1,834
Reaction score
3,411
Location
Wisconsin
Car(s)
24 MT "ordered", 19 Yaris MT, 03 Yukon XL
Installed eibach euro springs and spacers today! The box actually says for the Supra when it arrived. The lowered amount is just perfect! It’s not too low or high. It rides slightly stiffer than oem but still comfortable. The turns seems a little sharper as well! Overall very happy with this spring, just need to wait and get an alignment now. Also rubbing on my exhaust now over speed bumps but I’ll just adjust it when I do the Armytrix catless downpipe next 😈

IMG_2272.jpeg
Yeah, Eibach caught on to all of us using the springs for the MKV application, and are now officially labeling that part number as Supra in addition to Z4. Funniest thing of all, is I found one website that was selling the same kit on two different pages, one for Z4 and one for MKV...and of course, the MKV set was priced about $75 higher for the same damn part number. Supra tax is real, and total bullshit!
 

FuzzyRev

Well-Known Member
First Name
RT
Joined
Aug 4, 2021
Threads
4
Messages
1,834
Reaction score
3,411
Location
Wisconsin
Car(s)
24 MT "ordered", 19 Yaris MT, 03 Yukon XL
I thought about it until I saw the price, lol.
Yeah, price is steep, but it's well made, and is totally worth it for something you literally look at thousands of times.
 

Driver608

Member
First Name
Tom
Joined
Dec 17, 2021
Threads
1
Messages
13
Reaction score
18
Location
San Diego, CA
Car(s)
2022 GR Supra 3.0, 2004 Boxster S
I parked that sucker. Yesterday I tracked it at Chuckwalla Valley Raceway, what an awesome track beast. The first time I tracked it there with stock suspension and factory tires, the tires chunked after 3 sessions and I had to go home early. I got SPL everything for it (the whole kit), had my tech install, align and tune it and put cheater tires on it. Now I'm edging closer to the under 2:00 club there. On the check ride my tech (a much better driver than I am) said the car was tossable. That car is incredible.
 
Last edited:

Jnhalstead

Well-Known Member
Joined
Jun 15, 2021
Threads
3
Messages
131
Reaction score
296
Location
Augusta
Car(s)
GR Supra
Did some rollers
 
 
Top