What did you do to your Supra today?

[DarkZupra]

Prep for BBK install starting tonight

 

[Mrgolde]

Just got the tint done 20% all around and 70% on the windshield. Looks great.

 

[ReiH]

what size spacers do you have?

13mm front, 15mm rears ?

 

[STi_to_GRzupra]

Installed BMS spacers and ZL1 front & back rock guards.
Im running stock suspension A.T.M so it does have an oem+ look.

Dropping the Supra at Orlando Tinting Services for full front PPF next week.

 

[Jmanlevan]

First two mods in the books! I’ve had my car for two days. First was spent driving it back from an out of state dealership, learning all about the car, then taking it to a couple friends houses to show them. So day 2 meant I could start on mods. They’re minor, but it’s a start!

If you’re like me, you hate gloss screens so I added a matte screen protector to the center display to cut down on glare and keep fingerprints to a minimum.

https://www.amazon.com/INNOSURE-Multi-media-Touchscreen-Protecting-Accessories/dp/B0BQ6YM1FL

I’m also a sucker for the little details, so I added the red anodized tachometer ring. Pricey little bastard for what it is, but adds an extra layer of depth to the tach that helps enhance that 3D look the gauge graphics kind of have.

https://www.amazon.com/Dashboard-2018-2022-Tachometer-Decoration-Instrument/dp/B09MFLJ6LB

Both super easy installs. Took me all of 5 minutes to do both!

 

[J29DB03]

First two mods in the books! I’ve had my car for two days. First was spent driving it back from an out of state dealership, learning all about the car, then taking it to a couple friends houses to show them. So day 2 meant I could start on mods. They’re minor, but it’s a start!

If you’re like me, you hate gloss screens so I added a matte screen protector to the center display to cut down on glare and keep fingerprints to a minimum.

https://www.amazon.com/INNOSURE-Multi-media-Touchscreen-Protecting-Accessories/dp/B0BQ6YM1FL

I’m also a sucker for the little details, so I added the red anodized tachometer ring. Pricey little bastard for what it is, but adds an extra layer of depth to the tach that helps enhance that 3D look the gauge graphics kind of have.

https://www.amazon.com/Dashboard-2018-2022-Tachometer-Decoration-Instrument/dp/B09MFLJ6LB

Both super easy installs. Took me all of 5 minutes to do both!

Hmm… matte screen protector. Looks nice. I’m going to have to look into that.

 

[Jmanlevan]

Hmm… matte screen protector. Looks nice. I’m going to have to look into that.

If you get that same one, just be sure to get every single spec of dust off the screen with the provided sticker. Because I missed one little spec of dust and the bubble surrounding it was about the size of a quarter. Thankfully the screen protector lifts back off easily and I was able to get the sticker underneath it while 1/2 of the protector was still applied. Once that spec of dust was gone, it laid down easy without a single air bubble ??

 

[Eplejus]

OPF delete fitted today! As i finally got the DME flashed, I can now disable the OPF check flag.
The exhaust sounds soooo much better now

EU models has a v-band clamp instead of slip-on that you US guys has. Made fitting a bit easier.

 

[Mrgolde]

Got some black exhaust tips to replace the oem ones.

 

[SCZ4]

OPF delete fitted today! As i finally got the DME flashed, I can now disable the OPF check flag.
The exhaust sounds soooo much better now

EU models has a v-band clamp instead of slip-on that you US guys has. Made fitting a bit easier.

Very nice. Any before and after sound clips? Which pipe did you go with? Did you have to cut the exhaust?

Been contemplating the same here in the UK. I believe you can get a sensor\harness to trick the car the OPF is still fitted if you don't want a remap.

 

[Antiq8ted_Ex0]

After trying to source a real Artisan Spirits flare kit and having little luck with a realistic price for the FRP non-painted version. I decided to roll the dice and get a painted set from Rexpeed, and man am I glad I did. Paint match is perfect and fitment was excellent. Big shout out for @Jesse DaBears for getting these out to me insanely fast. Looking nice.

 

[Eplejus]

Very nice. Any before and after sound clips? Which pipe did you go with? Did you have to cut the exhaust?

Been contemplating the same here in the UK. I believe you can get a sensor\harness to trick the car the OPF is still fitted if you don't want a remap.

No sounds clip. Only got a old shitty phone that won't pick up the sound no good. But there was a huge difference in sound. Deeper, louder and more sporty.

Got the deleter from Milltek. I also have the Milltek resonated axle back system.

Yeah, I know Garage Whifbitz sells a OPF delete harness.

 

[SCZ4]

No sounds clip. Only got a old shitty phone that won't pick up the sound no good. But there was a huge difference in sound. Deeper, louder and more sporty.

Got the deleter from Milltek. I also have the Milltek resonated axle back system.

Yeah, I know Garage Whifbitz sells a OPF delete harness.

Thanks for that. I think that will make a much bigger difference in sound than a catted downpipe.

So you had the Milltek rear silencer first and wasn't quite enough in terms of volume. Now you're super happy?

 

[Eplejus]

Thanks for that. I think that will make a much bigger difference in sound than a catted downpipe.

So you had the Milltek rear silencer first and wasn't quite enough in terms of volume. Now you're super happy?

The Milltek resonated sounded almost like the oem muffler. Just a bit deeper tone to it.
I'm much more happy now, now it sounds like a proper sports car.
I have a catless downpipe that I'm going to fit on a later date in order to run a Stage 2 tune. That should open up the sound even more.

 

[Mr. Jonathan]

Cars and Coffee Huntsville AL.
Multiple Ferraris, Porsche, Maserati, Austin Martin…. Only two Supras. Oh and this clean GR Corolla.

Pics aren’t so good…