What did you do to your Supra today?

[Kiske]

Did my paid survey that I was signed up for after doing the post purchase one. Was 3 questions. What mods have you done, $$$ spent on them, and what brands from a list do you feel associate with the GR Supra brand.

finally had time to install my te37 sagas

Is that the Mag Blue or Matte Blue Gunmetal? Looks great on Turbulence! A light contrast without being too over the top.

 

[Loco38SUP]

I installed the Verus 6 port heat shield today.

-RJM

 

[PrisonerOfDoom]

I installed the Verus 6 port heat shield today.

-RJM

Nice! How difficult was the install?

 

[Loco38SUP]

Nice! How difficult was the install?

It was really simple and straight forward. First you assemble the two piece shield with the included Allen bolts. Then you remove 2 bolts from stock shield and mount the Verus one in that location.

 

[zrk]

It was really simple and straight forward. First you assemble the two piece shield with the included Allen bolts. Then you remove 2 bolts from stock shield and mount the Verus one in that location.

Say's you. I dropped one of the black spacers and now it's gone forever. Time to run to the hardware store.

 

[Loco38SUP]

Say's you. I dropped one of the black spacers and now it's gone forever. Time to run to the hardware store.

Oh no! ?

I was wondering if someone was going to do that. There is certainly an abyss below that area. I have a washer down there somewhere to retrieve from when I installed my strut brace.

I figured I would drop the skid plate during my next oil change and look for it.

-RJM

 

[John8]

K&N drop in filter, already felt a boost in throttle response (I'm tuned)

Also removed the charcoal sound dampener that rests under the filter.

I would never, ever use that filter. I did on a turbo and why do you think it gets more boost? Sure, it passes more air and dirt! I ruined my engine and had to get a replacement. I contacted K&N and they were of and would be no help. The mechanic I used, who had a big shop, showed me the damage caused. Told me the same thing, don't ever use this type of filter!

 

[Supercompact]

I bought a used CTS intake from a member here and installed it yesterday. Throttle response feels improved, but could be placebo. The sounds is AMAZING though! Totally worth it just for that fact.

 

[zrk]

I would never, ever use that filter. I did on a turbo and why do you think it gets more boost? Sure, it passes more air and dirt! I ruined my engine and had to get a replacement. I contacted K&N and they were of and would be no help. The mechanic I used, who had a big shop, showed me the damage caused. Told me the same thing, don't ever use this type of filter!

I'm uh.. not sure about that. You're saying the filter let in enough debris/particulate to get into the turbo, pass through the turbo fins, compress, and make it all the way into the block and caused serious block damage? Because of a drop in filter? Call me a little suspect on this one.

 

[Loco38SUP]

I would never, ever use that filter. I did on a turbo and why do you think it gets more boost? Sure, it passes more air and dirt! I ruined my engine and had to get a replacement. I contacted K&N and they were of and would be no help. The mechanic I used, who had a big shop, showed me the damage caused. Told me the same thing, don't ever use this type of filter!

I learned the hard way also many years ago with the spray lube filters. Over time the oil atomizes then coats MAF sensors and throttle bodies. Since then I only run OEM filters, its just not worth the 2-3Hp gain.

-RJM

 

[John8]

I'm uh.. not sure about that. You're saying the filter let in enough debris/particulate to get into the turbo, pass through the turbo fins, compress, and make it all the way into the block and caused serious block damage? Because of a drop in filter? Call me a little suspect on this one.

Why would I post something that isn't true? Look at my past posts. I don't do that. I am talking from experience. There was a lot of fine particles past the filter and yes, it caused excessive wear. So you are saying no filter is needed or just a simple mesh with oil on it? Sorry, but if you want to pay 1000s for a new engine go ahead. I am posting my experience and what the mechanic found. Excessively worn parts and fine dust! Saying suspect is saying I am lying.

 

[zrk]

I learned the hard way also many years ago with the spray lube filters. Over time the oil atomizes then coats MAF sensors and throttle bodies. Since then I only run OEM filters, its just not worth the 2-3Hp gain.

-RJM

That sounds right - I just said I'm not totally sure that we're talking about engine replacement here. For all of the cars I've had, I've never actually a throttle body or failed MAP sensor or anything along those lines cause enough damage to warrant an engine replacement. Blow turbo, value replacement, sure.

Saying suspect is saying I am lying.

No, I'm not, I'm just saying I'm suspect. A little bit of particulate or filter oil can 100% cause damage, I'm not denying that. I've just never seen an engine replacement because of it. To me, it just seems like it would have to be an absolutely perfect set of circumstances to actually lead to something as catastrophic as an engine replacement.

But what if I did flat out say you're lying? I'm just some idiot on the internet. Don't take it all so personally - the situation just seemed odd to me.

 

[Loco38SUP]

That sounds right - I just said I'm not totally sure that we're talking about engine replacement here. For all of the cars I've had, I've never actually a throttle body or failed MAP sensor or anything along those lines cause enough damage to warrant an engine replacement. Blow turbo, value replacement, sure.




No, I'm not, I'm just saying I'm suspect. A little bit of particulate or filter oil can 100% cause damage, I'm not denying that. I've just never seen an engine replacement because of it. To me, it just seems like it would have to be an absolutely perfect set of circumstances to actually lead to something as catastrophic as an engine replacement.

But what if I did flat out say you're lying? I'm just some idiot on the internet. Don't take it all so personally - the situation just seemed odd to me.

I agree everyone has their own experience to contribute. They keep selling these type filters for a reason. They’re quite popular and many people rave about them. In the end run what you think is best for your car and driving style.

Hey its Friday, beers for everyone. ??

 

[John8]

That sounds right - I just said I'm not totally sure that we're talking about engine replacement here. For all of the cars I've had, I've never actually a throttle body or failed MAP sensor or anything along those lines cause enough damage to warrant an engine replacement. Blow turbo, value replacement, sure.




No, I'm not, I'm just saying I'm suspect. A little bit of particulate or filter oil can 100% cause damage, I'm not denying that. I've just never seen an engine replacement because of it. To me, it just seems like it would have to be an absolutely perfect set of circumstances to actually lead to something as catastrophic as an engine replacement.

But what if I did flat out say you're lying? I'm just some idiot on the internet. Don't take it all so personally - the situation just seemed odd to me.

It matters because I would hate to see it happen to someone else, though it has and I am giving a warning here from actual experience. I have also rebuilt engines but when the engine got bad, I was not somewhere, where I could work on it (I was doing travel nursing). The mechanic ran a few racing cars and said he had seen the issue before. I had used, cleaned correctly and seated correctly the filter for quite a few 1000 miles before this happened. I also used synthetic oil changed every 5000 miles. Anyway, do as you please.

 

[cactusA91]

https://www.knfilters.com/maf/massair.htm

https://bobistheoilguy.com/forums/threads/maf-failure-from-lightly-oiled-air-filters.293216/

This is an old debate. I will say that dust is a terrible problem in AZ. Drives us all cray cray!

That said I just installed a KN and noticed it was over oiled from the factory, so I intend to remove it and clean it and re-oil it myself. Have been using KN style oiled filters on a Rotaxaircraft engine for years - also tends to get over-oiled. Key is to use the cleaner and wash it thoroughly and then let it dry for a while and only oil the outside.