antmazz
Member
- First Name
- Antonio
- Joined
- Jul 21, 2021
- Threads
- 1
- Messages
- 16
- Reaction score
- 9
- Location
- Edinburgh, Scotland
- Car(s)
- MKV Toyota Supra
- Thread starter
- #1
I bought the WiFi Adapter for MHD a couple weeks ago and been waiting for a day were I had some spare time to flash a "Stage 1" map onto the car and take it for a bit of a drive. Today was that day, or at least I thought so.
Got everything set up and ready to go. Ignition on, phone in flight safe mode, connected to battery charger. Connected the adapter and read the DME codes to make sure it was connected properly before trying the flash, all good. Select the "Stage 1" 95 Oct map, no options. Start Long Write. Connects to ECU. Flash reaches 5% and... fails. "Unable to prepare memory section".
Try again.
Reaches 5% and fails.
Deploy typical IT approach and turn it off and on again.
Car won't start.
Faecal matter fills underwear.
Refer to MHD manual - "If flash fails, lock car and leave for 20 minutes then try again".
Locks car.
Alarm immediately goes off.
Get's back in car and tries to read error codes.
"DME Unreadable"
Faecal matter now overflows underwear and starts pooling in the footwell.
Hail mary move, let's flash it back to stock.
Passes 5%.
2 minutes 32 seconds later, flash completes.
Car restarts.
Engine starts.
Emotional moment of relief.
It's safe to say it's been a rollercoaster of a morning. Sent MHD an email explaining everything that happened along with the logs available from the app. Anyone on here had a similar experience or know what it could be?
Got everything set up and ready to go. Ignition on, phone in flight safe mode, connected to battery charger. Connected the adapter and read the DME codes to make sure it was connected properly before trying the flash, all good. Select the "Stage 1" 95 Oct map, no options. Start Long Write. Connects to ECU. Flash reaches 5% and... fails. "Unable to prepare memory section".
Try again.
Reaches 5% and fails.
Deploy typical IT approach and turn it off and on again.
Car won't start.
Faecal matter fills underwear.
Refer to MHD manual - "If flash fails, lock car and leave for 20 minutes then try again".
Locks car.
Alarm immediately goes off.
Get's back in car and tries to read error codes.
"DME Unreadable"
Faecal matter now overflows underwear and starts pooling in the footwell.
Hail mary move, let's flash it back to stock.
Passes 5%.
2 minutes 32 seconds later, flash completes.
Car restarts.
Engine starts.
Emotional moment of relief.
It's safe to say it's been a rollercoaster of a morning. Sent MHD an email explaining everything that happened along with the logs available from the app. Anyone on here had a similar experience or know what it could be?
Sponsored