SuupYota
Well-Known Member
This happened to me Friday. I parked far out in the lot, turn off the car. I turn and a giant lifted truck flies in next to me and gets out with literally an inch from my car and opening the door. Uh why?
What did you do to your Supra today?
- Thread starter Ryanthetemp
- Start date
- Watchers 564
tub54500
Well-Known Member
- Joined
- Sep 26, 2022
- Threads
- 6
- Messages
- 163
- Reaction score
- 129
- Location
- East coast
- Car(s)
- A91 CU LATER
did you have to cut the bump stop? I know this eibach version didn’t come with bump stop replacement. The drop looks great
Installed Eibach Euro 0.8" / 20mm springs and 11/13mm spacers today.
Now I just need to drive the car for a couple of days to make the springs seat properly and then get an alignment.
FLtrackdays
Well-Known Member
Great job ?? Not that it’s bad looking but… Can you put the cover back on or do they make a cover for after the EOS mani? Those IAT temps are going to be so incredible on track ? ? ?Installed this $4k nightmare (EOS manifold). Only took about 8 hours…FML
Meanwhile hot Florida boy looks on at any/every Norway ?? pic just dreaming what it’d be like to drive a Supra there. So cool dude! Dying to visit someday ?
Installed Eibach Euro 0.8" / 20mm springs and 11/13mm spacers today.
Now I just need to drive the car for a couple of days to make the springs seat properly and then get an alignment.
MYA90SUPRA
Well-Known Member
I'm not liking the fact more people are saying these intake manifolds are a pita to install.Installed this $4k nightmare (EOS manifold). Only took about 8 hours…FML
suicidaleggroll
Well-Known Member
The manifold sits up too high on the right side so you have to cut the cover. I decided to switch to a carbon cover at the same time so I could do it all at once, unfortunately Eventuri’s “3 week” lead time has tuned into “3 months” so it still isn’t here yet, hopefully I’ll have it in another 3-4 weeks.
suicidaleggroll
Well-Known Member
Honestly if I had to do it again I’d just bring it to a shop and let them deal with it. I always do my own mods, but this one was just super frustrating, easily the worst install so far on this car. A smaller manifold wouldn’t have had as many problems, it took nearly 2 hours just to get this bastard to sit right on the head so the holes would actually line up…during which time an o-ring managed to fall out which luckily I noticed or I would have had a massive boost leak and would have to do it all over again. I haven’t actually driven the car yet, so who knows, maybe one did.
My recommendation is just take it to a shop and pay them whatever they want.
zrk
Well-Known Member
- First Name
- Zack
- Joined
- Apr 20, 2021
- Threads
- 80
- Messages
- 8,473
- Reaction score
- 14,119
- Location
- Chicago, IL
- Car(s)
- 2021 Supra - Nocturnal Black
They are not a pita to install.
Feldro
Active Member
- First Name
- Sean
- Joined
- Dec 20, 2022
- Threads
- 1
- Messages
- 44
- Reaction score
- 110
- Location
- Florence KY
- Car(s)
- 2023 Supra Premium A90 MT
bushido
Well-Known Member
did you really.. that gap is massive??
Eplejus
Well-Known Member
I did not cut them. There where no new bump stops included in the kit, so I take that as new bump stops or modifying the old one's are not needed if the drop is only 0.8" inch.
Pining for the fjords eh?
I live in the south-eastern parts of Norway, where everything is flat, flat and flat. But 6-7 hours away you can find the famous Atlantic Road and Trollstigen (The troll ladder).I hope to take a ride there during this summer season.
suicidaleggroll
Well-Known Member
Which bushings did you use and how’s the NVH?Engine mounts installed. Driver side was so much fun
zrk
Well-Known Member
- First Name
- Zack
- Joined
- Apr 20, 2021
- Threads
- 80
- Messages
- 8,473
- Reaction score
- 14,119
- Location
- Chicago, IL
- Car(s)
- 2021 Supra - Nocturnal Black
lol. No, we do the manifolds after we drop in engines. Otherwise it's in the way of the hook for the engine hoist.
