Noise with Verus Camber plates

[OverRev]

I am running H&R springs with verus camber plates for 3000km so far, and experiencing clunking noise up front when driving thru potholes or sewage caps, double checked all bolts and nuts they're all tight and wonder if anyone has the same experience.

Sponsored

 

[Renegadmelons]

IIRC This is a relatively common issue with specific lowering springs, I don't have personal experience, but just wanted to point out it could also be springs/bump stops and not the camber plates.

 

[ZokiSpeed]

Before i switched to KW Clubsport coilovers i had the Verus-mounts with H&R springs too! No clunking noise, nothing. Like @Renegadmelons said: Better check the bump stops. Sometimes the dealer forget to remove the factory transport security behind the rubber cuffs from the damper. That could cause the noise.

 

[OverRev]

Yup, the springs was making very little noise before, mostly in the rear but Tein springs sleeves fixed it

 

[SilverBully]

I got a bad clunk on the front driver side that I am pretty positive is coming from the verus camber plates

 

[DC5UPRA]

I got a bad clunk on the front driver side that I am pretty positive is coming from the verus camber plates

Check the big nut that goes to the strut in the middle of the plate (gotta lift the black plastic cover). It might have come loose if you can twist it with your hand.

 

[SilverBully]

Check the big nut that goes to the strut in the middle of the plate (gotta lift the black plastic cover). It might have come loose if you can twist it with your hand.

I checked everything like 15 times already and I am just getting ready to go back to stock mounts, see my videos here https://www.supramkv.com/threads/new-rattle-please-help.38074/

Sponsored