Search results

Never had a ti system before. These don't weigh anything. Got the lithium battery in and the verkline arms. Probably do this tomorrow in the daylight and will get around to the Wagner manifold eventually

Meow

today we missed the ups man.

...no to all of this

See the hex below the valve stem? It screws apart. The tpms clamshell clamps the wheel hole. Just unscrew it with a deep well and it comes right off.

go get the recall performed at toyota https://www.toyota.com/recall/ https://www.supramkv.com/threads/recall-data-communication-module-dcm-update.23220/

Throttle hesitation is the transmission decoupling clutch delay, not something with the actual throttle (its a fuel milage thing for CAFE). XHP can remove it by permanently coupling your transmission. Related - XHP trans tunes can also remove your auto start/stop by disabling it on the...

the raised edge on the ppe pan probably precludes using that oe gasket. might not. I don't think you can order the metal gaskets alone either. I know they come in the filter kit 24007855263 about $100

.

Yep, alignment important but wait a week until it all settles in some

A butthole thermometer for your tires, except the whole tread is the butthole. Stick it in.

1 top hat nut, 3 spindle bolts and pivot the whole assembly out of the wheel well with top hats in place in the strut tower. Swap spring and zip the nuts back on. Rear end is almost as quick. Takes longer to jack up and take the wheels off then it does to replace the spring

You can literally do the fronts in 10 minutes a side, what

but ppe's is bigger. bigger pp's are better.

ppe has a drain plug at least

takes less then an hr with basic hand tools and 2 jacks, so... $100-150 tops

hpfp cant flow enough for e85 from 3-5.5k rpm

Vitours will beat every tire on the super 200 list and perform similarly to the goodyear super 3rs

going to look 10x worse after 10 miles on the road if you don't paint them, much ado about nothing. take 5 minutes and polish them if scuffs bother you.