Anyone have Dyno numbers for a FBO 2021 Supra with no tune? Catted DP, exhaust, and Intake preferably...

[TheKrumpet]

Just curious if anyone has these numbers...will save me some hassle and money

Sponsored

 

[Sigg]

Just curious if anyone has these numbers...will save me some hassle and just money

Not sure but what I can tell you is swapping to AA catted dramatically changes performance. At stock car makes about 5psi at 3k rpm. Post FBO my car makes 18.5 pounds at 3k rpm. (Stock targets 16psi on 21s so you'd pretty much be max boost at 2500 rpm-redline) Huge jump in low end torque and power just with the DP. I have heard between 20-40hp just from the swap. Not sure though. I'm also curious.

 

[TheKrumpet]

There is a dyno'ing event this Sunday that I might go to...but the line of first come first serve dyno events seems like it'd suck and also I've heard of the straps damaging some things when you dyno our cars...I'm real curious if I'm near 400whp with a 2021 3.0 Supra with AA catted DP, aFe Exhaust, and MST intake...I know a lot of people say you get really marginal gains without a tune, but I'm still curious. I'd prefer not to tune for reliability

 

[Escapist]

Doesn't the DME attempt to revert back to stock targets without a tune once it realizes somethings different?

 

[Sereph102889]

There is a dyno'ing event this Sunday that I might go to...but the line of first come first serve dyno events seems like it'd suck and also I've heard of the straps damaging some things when you dyno our cars...I'm real curious if I'm near 400whp with a 2021 3.0 Supra with AA catted DP, aFe Exhaust, and MST intake...I know a lot of people say you get really marginal gains without a tune, but I'm still curious. I'd prefer not to tune for reliability

I actually have a baseline dyno picture of just a downpipe installed. No tune, no exhaust, no intake. The shop I went to forgot to do a full on base line before my downpipe install, so I asked to get one with the downpipe before the tune. This is on a 2021. Car ended up making 443whp and 522tq after the MHD OTS map was flashed.

 

[TheKrumpet]

I actually have a baseline dyno picture of just a downpipe installed. No tune, no exhaust, no intake. The shop I went to forgot to do a full on base line before my downpipe install, so I asked to get one with the downpipe before the tune. This is on a 2021. Car ended up making 443whp and 522tq after the MHD OTS map was flashed.

Perfect, just what I was looking for at the time. Those are some good numbers with just a catted or catless?

 

[Sereph102889]

Perfect, just what I was looking for at the time. Those are some good numbers with just a catted or catless?

Catless.

Sponsored