Sponsored

BM3 E50 OTS logs and 60-130

hbak

New Member
First Name
Henry
Joined
Jun 30, 2026
Threads
1
Messages
2
Reaction score
0
Location
florida
Car(s)
m340i
Just wanted to get some opinions on how my bm3 e50 logs look. From my limited knowledge they look clean. Only concern is hpfp actual deviating slightly from target in the mid range. Im not too concerned as everything else looks clean but definitely squeezing the hpfp for everything it has. Also working the turbo pretty hard with %90+ WGDC. Thoughts?Datalogs

IMG_6773.webp
Sponsored

 

QTR FMS

Well-Known Member
First Name
Fahad
Joined
Nov 4, 2025
Threads
4
Messages
64
Reaction score
30
Location
Qatar
Car(s)
2024 6MT
Not just hpfp, you have couple of rf and torque limiters codes, you are overboosting in some area and underboosting in others, you maxed out the end of injection timing window.

you can even run more timing and better afr curve.

a proper tune will get you 8.5 seconds easily.
 

dustwhyn

Well-Known Member
First Name
Dustyn
Joined
Mar 1, 2023
Threads
6
Messages
202
Reaction score
142
Location
‎
Car(s)
2024 M240i xDrive
This is VERY slow for this tune. I used to have an M340i that ran an 8.70 on this same tune. A Supra should be much faster.
 
OP
OP

hbak

New Member
First Name
Henry
Joined
Jun 30, 2026
Threads
1
Messages
2
Reaction score
0
Location
florida
Car(s)
m340i
Forgive me if im wrong, but shouldn't an OTS BM3 E50 tune on 8HP B58 be running around 7-8?
Definitely not 7s with tu pump, I do believe these times are more or less normal for the mods. All cars I have seen running 8s are either f series 340s which are 400lbs lighter or have a aftermarket hpfp.
 

QTR FMS

Well-Known Member
First Name
Fahad
Joined
Nov 4, 2025
Threads
4
Messages
64
Reaction score
30
Location
Qatar
Car(s)
2024 6MT
My own car 6mt stock only downpipe and 30% methanol in tank.

this is the same tune i have posted as base map for 6mt.

1783008702838-43.webp
Sponsored

 
 








Top