Error code 030490, blind spot and lane assist

[SupraTimo]

Hi everyone.
im sorry if this has been answered before, I just couldn’t find a more in detail answer.
I installed a new steering wheel and now I have Error 030490. Steering wheel electronics module (LRE), missing LIN slave .
The errors on the dash are:
Lane assist and blind spot monitoring error .
Has anyone encountered this issue after your new steering wheel install ?
Best regards

Sponsored

 

[PASupra85]

Have you figured out your issue? I just experienced the same issue today. I might try to take the wheel off to ensure everything is plugged back in… hoping you found a fix before I go that route!

 

[SupraTimo]

I actually have not.
I’m going to do the same , I’m gonna take the wheel off and reinstall.
I’m thinking that maybe I either installed the vibration motor backwards or I didnt plug something fully. If you do take the wheel off before me, would you please be able to take a pic of the positioning of the vibration motor?
Best regards .

 

[PASupra85]

Will do. I’m thinking about doing it tonight.

 

[PASupra85]

I actually have not.
I’m going to do the same , I’m gonna take the wheel off and reinstall.
I’m thinking that maybe I either installed the vibration motor backwards or I didnt plug something fully. If you do take the wheel off before me, would you please be able to take a pic of the positioning of the vibration motor?
Best regards .

so it turns out I and a dodo 🦤. I didn’t plug one of the cables in all the way. It was the cable directly behind the airbag. I won’t have the chance to drive the car till tomorrow, but I am assuming this was the issue.

 

[calmeda1]

so it turns out I and a dodo 🦤. I didn’t plug one of the cables in all the way. It was the cable directly behind the airbag. I won’t have the chance to drive the car till tomorrow, but I am assuming this was the issue.

The exact same thing happened to me before and it was exactly this. I so being so cautious on not fucking up the airbag, that I forgot to connect the cables :|

 

[PASupra85]

Haha 100% on point. I got nervous plugging the top two back in that it distracted me. Glad this seems to be the cause and not something else!

 

[SupraTimo]

That’s great. I’m glad yours was just that.
I’m gonna re install the airbag again, hopefully it’s just that.
Best regards

 

[PASupra85]

That’s great. I’m glad yours was just that.
I’m gonna re install the airbag again, hopefully it’s just that.
Best regards

Definitely was the case… I drove around for 1/2 hour aimlessly today just to make sure. No more warning! On a side note…. I’m really disappointed in the Injen evolution intake. Absolutely no increased Turobksi noises .

 

[SupraTimo]

Definitely was the case… I drove around for 1/2 hour aimlessly today just to make sure. No more warning! On a side note…. I’m really disappointed in the Injen evolution intake. Absolutely no increased Turobksi noises .

I’ve heard the one that makes the most noise is the armaspeed intake. I have a AMS and honestly don’t even hear it but it doesn’t bother me !
I’ve seen so many armaspeed for sale on the forum so maybe you can give that one a shot !

Sponsored