Front ride height sensor bracket

[Jmanlevan]

Does anybody have a link to a billet aluminum ride height sensor bracket for the front?

Mine got broken during lowering spring install and I can only seem to find the rear bracket.

I ordered these below thinking that the torque solutions one was going to work for the front since it didn’t specify whereas the Visconti bracket specifically states “rear” in the description.

https://www.maperformance.com/produ...bracket-2020-2023-toyota-supra-3-0t-ts-gr-739

https://speedindustry.com/visconti-...t2XOdEuRnNwc65GxPL3s297gBfA3AOURoCuVwQAvD_BwE

Sponsored

 

[razorlab]

There is no front aftermarket replacement. What part did you break?

 

[Timmy_Jones]

There is no front aftermarket replacement. What part did you break?

I believe he said FRONT height sensor?

 

[razorlab]

I believe he said FRONT height sensor?

Are you serious? I noted there is no aftermarket front mount and then I inquired what he broke of that, since there are multiple parts. The reason I asked to be more specific is so I could try to help with part numbers and such.

Mental note to never help you with anything.

 

[Dr. Supra]

Welp I got some bad news. The updated brackets don't have that push clip, it's a screw thread with no nut.

 

[FLtrackdays]

Does anybody have a link to a billet aluminum ride height sensor bracket for the front?

Mine got broken during lowering spring install and I can only seem to find the rear bracket.

I ordered these below thinking that the torque solutions one was going to work for the front since it didn’t specify whereas the Visconti bracket specifically states “rear” in the description.

https://www.maperformance.com/produ...bracket-2020-2023-toyota-supra-3-0t-ts-gr-739

https://speedindustry.com/visconti-...t2XOdEuRnNwc65GxPL3s297gBfA3AOURoCuVwQAvD_BwE

I can vouch I haven’t broken the Visconti aftermarket rear ride height sensors yet… ?

My window film is holding up amazingly well. I’ve gotten peppered many of times by GT3 wide ass bubble gum tires. No cracks so far ?

 

[DC5UPRA]

Welp I got some bad news. The updated brackets don't have that push clip, it's a screw thread with no nut.

Mine had a nut.

 

[Timmy_Jones]

Mine had a nut.

Seems like the better design and much easier to remove!

 

[ericchen_ec]

so theoretically, could remove the push clip and put in a bolt&nut instead?

 

[Jmanlevan]

@razorlab this thin round plastic piece is the part that broke supposedly. The shop that installed my lowering springs is ordering an OEM replacement but I was hoping there was a billet replacement like the rear since this seems easily broken.

Sorry for the late reply, I've had a hectic couple of days. Meant to reply sooner. Thanks for offering up the help!

 

[razorlab]

@razorlab this thin round plastic piece is the part that broke supposedly. The shop that installed my lowering springs is ordering an OEM replacement but I was hoping there was a billet replacement like the rear since this seems easily broken.

Sorry for the late reply, I've had a hectic couple of days. Meant to reply sooner. Thanks for offering up the help!

Okay, let me know if you end up needing any part numbers.

 

[Jmanlevan]

Okay, let me know if you end up needing any part numbers.

I’m pretty sure the shop that installed my lower ring springs already has the correct replacement part on the way but I appreciate it and will reach out if I need!

 

[Jim_Harrison]

I broke mine during a Shock replacement ordered a new one from our local Toyota Dealer got it in two days.

 

[REXN]

Would anyone have the part number for the replacement?

 

[aayanmak]

Okay, let me know if you end up needing any part numbers.

I broke this same piece installing my lowering springs could you please send me the part number

Sponsored