Bflood
Well-Known Member
- Joined
- Jun 20, 2020
- Threads
- 11
- Messages
- 389
- Reaction score
- 332
- Location
- Columbus OH
- Car(s)
- 3.0 Premium
- Thread starter
- #1
Would anyone be interested in a top mount kit? Will come complete with efr9180, capable of 950whp. Will come with pre-mounted oem wastegate and everything needed to make it work.
I moving from 2 port to 6 port head and will have to start from scratch.
EDIT:
I purchased this kit about 6 months ago from DocRace and maybe have 1,500 miles on this setup since install.
A couple items were upgraded/modified making this turn-key:
1- The oil drain line is now comprised of -10 AN fittings and hoses vs the rubber hose and hose clamps that were provided.
2- I replaced the silicone couplers with Vibrant HD clamps so there's zero chance of blowing them off under high boost
3- The entire hot side was wrapped to lower engine bay temps.
4- New OEM wastegate installed and clocked
No modifications will be necessary. Just bolt on and GO.
I moving from 2 port to 6 port head and will have to start from scratch.
EDIT:
I purchased this kit about 6 months ago from DocRace and maybe have 1,500 miles on this setup since install.
A couple items were upgraded/modified making this turn-key:
1- The oil drain line is now comprised of -10 AN fittings and hoses vs the rubber hose and hose clamps that were provided.
2- I replaced the silicone couplers with Vibrant HD clamps so there's zero chance of blowing them off under high boost
3- The entire hot side was wrapped to lower engine bay temps.
4- New OEM wastegate installed and clocked
No modifications will be necessary. Just bolt on and GO.
Sponsored
Last edited: