Headliner removal

[complexfemme]

Hello! I was wondering if anyone knows how to remove this sun visor piece. I'm trying to remove the headliner and this is all I have left to yank off

Thanks in advance!

Sponsored

 

[Tsuki8]

Pinch these together (inward).
I used 2 flathead screwdrivers.
Or needle nose pliers.

 

[complexfemme]

Pinch these together.

Thank you! Would you happen to know how to take the entire headliner out the car? Hahhaa. This ceiling been falling on top of my head for hours.

 

[Tsuki8]

Thank you! Would you happen to know how to take the entire headliner out the car? Hahhaa. This ceiling been falling on top of my head for hours.

Manual will walk you through it.
When you drop the headliner you can rest it on the steering wheel and seats.
See page 2884 of the workshop manual: https://www.supramkv.com/threads/workshop-service-manual.2415/post-138353
Visual diagram/illustation on page 2881/2882.

 

[complexfemme]

Manual will walk you through it.
When you drop the headliner you can rest it on the steering wheel and seats.
See page 2884 of the workshop manual: https://www.supramkv.com/threads/workshop-service-manual.2415/post-138353
Visual diagram/illustation on page 2881/2882.

I love you so much

 

[complexfemme]

Well, I couldn't get it out the car so I'll be working with it inside, but does anyone know if these plastic and metal pieces can be removed? Or just drill through it? I'm trying to do a starlight headliner by the way ‍

 

[J29DB03]

Hmm, I guess you can code in the little Rolls-Royce harpist so…

 

[Tsuki8]

Hmm, I guess you can code in the little Rolls-Royce harpist so…

https://www.scuderiacarparts.com/part-finder/rollsroyce/phantom/oe/160/969/26775

 

[J29DB03]

https://www.scuderiacarparts.com/part-finder/rollsroyce/phantom/oe/160/969/26775

Not gonna lie, if I could do this and make it appear as though it had always been there I definitely would. I’ve always kept an umbrella in my car with never anywhere nice to store it.

 

[john.mkv]

Well, I couldn't get it out the car so I'll be working with it inside, but does anyone know if these plastic and metal pieces can be removed? Or just drill through it? I'm trying to do a starlight headliner by the way ‍

Hey I’m looking to do this in the next couple days. Did you end up removing the plastic and metal pieces or drill through them?

 

[Vertex]

Not gonna lie, if I could do this and make it appear as though it had always been there I definitely would. I’ve always kept an umbrella in my car with never anywhere nice to store it.

When I visited my good buddy in Tennessee he we had two in the car behind the seats. Even if they're back pretty much all the way there is still quite a lot of room there.

 

[J29DB03]

When I visited my good buddy in Tennessee he we had two in the car behind the seats. Even if they're back pretty much all the way there is still quite a lot of room there.

Yea, that’s where I have mine but I’m still not happy with it. I’m very anal about things being in my car that don’t have a proper place, realizing an umbrella is not the same as a used bag of McDonald’s.

Sponsored