yoru12
New Member
- Thread starter
- #1
I've installed KW V3 coilovers without the camber plates on my brand new Supra under 1k miles.
After 2 weeks of installing the coilover, I finally got the alignment however:
Front alignment is way off with:
-1.7 and -2.6
That's 0.9 difference and it's the first time I've ever seen that.
Toe and everything else is fixed even the rear is -2.3/-2.4.
I know the front camber is not adjustable unless I have the camber plates or LCA. Also this is not my first time installing coilovers, I have installed about 5 of them and this is first time dealing with the one without camber plates.
-1 camber different even without the camber plate is something wrong correct?
Did I install the KW V3 wrong?
Both front coilover's collar placement and heights are the same.
----------------------------
EDIT:
Re-checked the top hat center screw, passenger side was good but driver side had few turns.
I know this could change height 1-2mm most likely but wouldn't affect -1 degree camber difference correct?
Driver side is the one with less camber (-1.7)
After 2 weeks of installing the coilover, I finally got the alignment however:
Front alignment is way off with:
-1.7 and -2.6
That's 0.9 difference and it's the first time I've ever seen that.
Toe and everything else is fixed even the rear is -2.3/-2.4.
I know the front camber is not adjustable unless I have the camber plates or LCA. Also this is not my first time installing coilovers, I have installed about 5 of them and this is first time dealing with the one without camber plates.
-1 camber different even without the camber plate is something wrong correct?
Did I install the KW V3 wrong?
Both front coilover's collar placement and heights are the same.
----------------------------
EDIT:
Re-checked the top hat center screw, passenger side was good but driver side had few turns.
I know this could change height 1-2mm most likely but wouldn't affect -1 degree camber difference correct?
Driver side is the one with less camber (-1.7)
Sponsored
Last edited:
