OEM a91 stripes?

[ayoh]

Does anyone know where I can purchase toyota a91 stripes? I'm getting ppf on my car and would like to get new ones to put on top of the ppf. I took a look at the speed industry stripes but it doesnt seem to have the rounded edges like the toyota ones

Sponsored

 

[puzzled]

I work with vinyl all the time and it's not difficult to free-hand cut the corners round. Honestly I'd either buy the pre-cut ones or just buy a roll of 3M 2080 and make one from scratch if I can find a small-ish matte roll.

If you completely don't trust yourself, you can get a hole puncher and punch a few holes in some masking tape, mount it to the vinyl by aligning the outer circle with the corners and cut along the masking tape to get your radius. Or use a geometric ruler/circle template, score the vinyl gently with a knife and cut along the line with your scissors.

 

[BA9092]

I just made my own too.

I ordered some sample vinyl pieces as I wanted to match my gunmetal metallic powder-coated wheels. Once I found a very close match, I ordered 2 sq ft of it for like $20 on Amazon.

I used some shelving contact paper to trace the fender curves and mark my lines. Then cut those and stuck them on the back of the vinyl to outline the areas to be cut. Came out pretty good considering the curves were hand cut with an artist exact-o blade.

 

[gtshnzr]

Does anyone know where I can purchase toyota a91 stripes? I'm getting ppf on my car and would like to get new ones to put on top of the ppf. I took a look at the speed industry stripes but it doesnt seem to have the rounded edges like the toyota ones

FT Speed sells some ... easy peasy to install

 

[ayoh]

My ppf installer ended up reaching out to toyota and got one directly from them. thanks everyone

 

[EnzoB]

very old thread, but does anyone know the exact size of those? i would like to make them on my own and not buy it from US with extreame shipping costs

Sponsored