Titan axles

[Uwatm8]

Anyone heard of these? For 3k I might just do it

No tq or Hp figures tho, little bit sus.

https://titanmotorsports.com/collec...-motorsports-mkv-supra-axles-no-core-required

Sponsored

 

[zrk]

Anyone heard of these? For 3k I might just do it

No tq or Hp figures tho, little bit sus.

https://titanmotorsports.com/collec...-motorsports-mkv-supra-axles-no-core-required

lol. No one is going to provide torque numbers for the limits of an axle. It's 100% dependent on suspension geometry. Lowered cars will have a completely different lorque limit than stock suspension than a SPL setup for drag.

 

[MattPhantom]

Replaced my order for DSS axles at titan for these on Monday and already have a tracking number. Beats waiting another 6 months.

 

[Mason]

Wow. Waited 10 months to get my DSS axles. I would jump on these if I was in need

 

[DarkZupra]

lol. No one is going to provide torque numbers for the limits of an axle. It's 100% dependent on suspension geometry. Lowered cars will have a completely different lorque limit than stock suspension than a SPL setup for drag.

This must be new. Back when I did built hondas, every axle had a rating. Youd buy 500 or 800 or 1000 hp axles.

 

[NitroYellowMKV]

For anyone still wanting I have a few sets on hand left in stock! $2899 shipped. Will be out of these by the end of the day forsure already 32 sets sold

 

[AdamP]

This must be new. Back when I did built hondas, every axle had a rating. Youd buy 500 or 800 or 1000 hp axles.

Might be just Titan. My DSS axels for my FD are rated for 1400 HP.

 

[zrk]

Might be just Titan. My DSS axels for my FD are rated for 1400 HP.

HP Isn't even an interesting metric for axles.. so I'm not sure why they would do that (they also don't). There also isn't a single supra that makes 1400hp, so I'm not sure how they'd even begin to suggest that. Norato has broken several sets of DSS axles with his 15'' welds and suspension geometry, at around 900ftlbs of torque at the line.

 

[DarkZupra]

HP Isn't even an interesting metric for axles.. so I'm not sure why they would do that (they also don't). There also isn't a single supra that makes 1400hp, so I'm not sure how they'd even begin to suggest that. Norato has broken several sets of DSS axles with his 15'' welds and suspension geometry, at around 900ftlbs of torque at the line.

Im not sure what other metric youd use to compare say, 5 different sets of axles? Torque, sure. But if theres 5 different companies making axles, that range from $2k to $20k, how do they differentiate them?

 

[zrk]

Im not sure what other metric youd use to compare say, 5 different sets of axles? Torque, sure. But if theres 5 different companies making axles, that range from $2k to $20k, how do they differentiate them?

It would be torque, yes. But more so, just.. strength. There's a lot more to it than just 'it's good for <some torque>'. Materials, spline, tensile strength, etc.

https://www.dragzine.com/tech-stori...-you-should-know-about-axles-for-drag-racing/

 

[AdamP]

HP Isn't even an interesting metric for axles.. so I'm not sure why they would do that (they also don't). There also isn't a single supra that makes 1400hp, so I'm not sure how they'd even begin to suggest that. Norato has broken several sets of DSS axles with his 15'' welds and suspension geometry, at around 900ftlbs of torque at the line.

FD as in FD3s RX7...Never said 1400 HP supra. Also DSS rates their axles for the A90 @ 1000+

 

[AHP]

Axles and the rest of your drivetrain have no idea what horsepower is, only torque. HP 'ratings' for drivetrain parts are just marketing wank.

 

[zrk]

Axles and the rest of your drivetrain have no idea what horsepower is, only torque. HP 'ratings' for drivetrain parts are just marketing wank.

??

 

[AdamP]

There are equations to measure... there equations for everything.

Sponsored