Torque Specs for Lug Nuts on Wheel Stud Conversion

[Even Heaven]

Hey everyone.

I bought the Mevius wheels studs and installed them. I have them torqued to 25 ft/lbs.

Does anyone know what the torque specs should be for the lug nuts that follow? Thanks in advance.

Sponsored

 

[lucky phil]

100 ft/ lbs I would say. Same as the std wheel bolts. The torque spec for a fastener is a product of the bolt diameter and material but 100ft/lbs is pretty standard for wheel nuts and bolts. Don't drive it at 25 ft/lbs

Phil

 

[Oodis]

Hey everyone.

I bought the Mevius wheels studs and installed them. I have them torqued to 25 ft/lbs.

Does anyone know what the torque specs should be for the lug nuts that follow? Thanks in advance.

Standard wheel nut torque

25 ft/lbs is fine for studs did you dab some lock tight on them?

 

[Rocksandblues]

2 uga dugas.

 

[Even Heaven]

Standard wheel nut torque

25 ft/lbs is fine for studs did you dab some lock tight on them?

So 101 ft/lbs? Also, yes I did. Deep cleaned the threads and followed up with Loctite

 

[Evolution]

2 uga dugas.

Dont forget to use one of these too.

 

[Vertex]

If you were referring to the studs getting torqued down I do believe it was like 25-29ft lbs for those but don't recall exactly what they were.
Here are the lug nut/bolt torque recommendation. I just do 105

 

[Eastwood]

One of the most popular studs/lug combos is from Motorsports Hardware. Here's their recommendation on torque specs from their site.

https://motorsporthardware.com/faq/

 

[digdeep0169]

Here's my stud/lug conversion - thanks Speed Industry!

Sponsored