trash site

[razorlab]

Yes I’m sure

Is that yours? Can you measure the wheels for us?

Sponsored

 

[A90.C]

Is that yours? Can you measure the wheels for us?

Already on the car but quoting Chris from Vargas:

58x46mm for GC, 63x46 for GC+

and then the difference between GC and GC mid is whole casting and G30 (770) turbine wheel.

 

[razorlab]

Already on the car but quoting Chris from Vargas:



and then the difference between GC and GC mid is whole casting and G30 (770) turbine wheel.

Those are compressor wheel measurements I assume?

 

[A90.C]

Those are compressor wheel measurements I assume?

Correct. Unsure of the GC+ turbine size.

 

[razorlab]

Correct. Unsure of the GC+ turbine size.

So which is the compressor inducer size? I'm putting all inducer (compressor) in the list as that is mainly how people publish turbo wheel sizes, exducer on the exhaust side.

It can't be 46mm since that is smaller than stock. Not 100% sure what you mean by 58x46.


Looks like the G30-770 Exhaust Exducer is 55mm.

 

[xyros]

Thank you for doing this.
Pure 850

 

[razorlab]

Thank you for doing this.
Pure 850

Thanks! Did you also measure the turbine? All the Pures run the same compressor wheel size it looks like. Interested in the pure 850 turbine size!

 

[xyros]

Thanks! Did you also measure the turbine? All the Pures run the same compressor wheel size it looks like. Interested in the pure 850 turbine size!

I did not. I am pulling this turbo off soon and will measure then.

 

[Jiaim]

You can ad the alibaba specials :

G30-770 ball bearing 2ports : https://french.alibaba.com/p-detail...spm=a2700.galleryofferlist.0.0.2b106ba6BXiSDS
Compressor 58/71mm Turbine 50/55mm

G30-900 ball bearing 2ports : https://french.alibaba.com/p-detail...spm=a2700.galleryofferlist.0.0.3b934a75L1LYVt
Compressor 62/76mm Turbine 50/55mm

G30-770 ball bearing 6ports : https://french.alibaba.com/p-detail...119.html?spm=a2700.details.0.0.4f166524K1pEZJ
Compressor 58/71mm Turbine 50/55mm

GTX3582 ball bearing 6ports : https://french.alibaba.com/p-detail...?spm=a2700.shop_plser.41413.29.65cf6a778ZHNGT
Compressor 66/82mm Turbine 58/66mm

 

[razorlab]

You can ad the alibaba specials :

G30-770 ball bearing 2ports : https://french.alibaba.com/p-detail...spm=a2700.galleryofferlist.0.0.2b106ba6BXiSDS
Compressor 58/71mm Turbine 50/55mm

G30-900 ball bearing 2ports : https://french.alibaba.com/p-detail...spm=a2700.galleryofferlist.0.0.3b934a75L1LYVt
Compressor 62/76mm Turbine 50/55mm

G30-770 ball bearing 6ports : https://french.alibaba.com/p-detail...119.html?spm=a2700.details.0.0.4f166524K1pEZJ
Compressor 58/71mm Turbine 50/55mm

GTX3582 ball bearing 6ports : https://french.alibaba.com/p-detail...?spm=a2700.shop_plser.41413.29.65cf6a778ZHNGT
Compressor 66/82mm Turbine 58/66mm

Those are interesting. I know a bunch of VW guys use the alibaba turbos and found out they are the same turbos vendors are selling for much more.

 

[VA90]

Those are interesting. I know a bunch of VW guys use the alibaba turbos and found out they are the same turbos vendors are selling for much more.

People would be shocked at how much of the stuff sold by vendors here in the States can be found on alibaba for 50% less. It’s the same stuff.

 

[6SPDA91]

Is it pointless to install one of these options on the MT Supra when only JB4 is available?

You can have the MT ECU unlocked by Femto and tuned, so theoretically you could run one of these.

There's a few people already unlocked and tuned

 

[DarkZupra]

Is there any consensus on which of these options has the highest quality? Im femto unlocked but not cloned, so im forced to use one of these turbos, and im not sure which is best (from a quality perspective).

 

[_Sp1ral0ut]

Does the DAW kit need to be added to the list, @razorlab ?

https://1fastsupra.com/products/bmw-supra-b58tu-gen-2-ultra-flow

 

[razorlab]

Does the DAW kit need to be added to the list, @razorlab ?

https://1fastsupra.com/products/bmw-supra-b58tu-gen-2-ultra-flow

Added. Not sure what the turbine exducer size is though.

Sponsored