Upgrading intake and part snapped off

[genoxy]

Hello,

I was upgrading to MST intake today and this plastic hose snapped off, is that the vacuum line?

Any suggestions on how to repair? Thanks

Sponsored

 

[a90moe]

Hello,

I was upgrading to MST intake today and this plastic hose snapped off, is that the vacuum line?

Any suggestions on how to repair? Thanks

Replacement from OEM or a shop that could fabricate a hose with the required fittings.. I broke the upper tab lock too

 

[genoxy]

So frustrating... Noone mentions how fragile it is but for now I took the part off the head and super glued it together then screwed it back in

Will order a new part eventually

Toyota 12203 waa03

https://parts.toyota.com/p/Toyota__/PIPE-SUB-ASSEMBLY---VENTILATION/78451816/12262WAA03.html

 

[Bkuu18]

So frustrating... Noone mentions how fragile it is but for now I took the part off the head and super glued it together then screwed it back in

Will order a new part eventually

Toyota 12203 waa03

https://parts.toyota.com/p/Toyota__/PIPE-SUB-ASSEMBLY---VENTILATION/78451816/12262WAA03.html

I installed the MST intake today and although had some difficulty, i manage to get everything together. One of my PVC hose tab lock broke but it looks like it could still connect to the piece securely. However the intake doesn't sound like anything from videos I've seen and not even loud ( house cover removed). I've had installed a CAI on pervious car before and this one sounds like something is wrong. Did you have any issues with that part that broke after installing? I wonder if the broken tab lock is the issue or something is not secured all the way.

 

[genoxy]

Hello the PCV hose is so brittle and even the clips break quite easily but that shouldn't have any impact on the sound from the MST. Would help if you can post a video of the sound and the installed MST just to see how you did it?

I noticed it's not that loud in comfort mode but in Sport mode it's got super loud induction noise now.

 

[LVCATZ]

Had the same thing happen to me. My local dealer has good prices and discounts on the parts. I got it for less than $25. I thought it would be $100+.


PIPE SUB-ASSEMBLY, VENTILATION
Part Number: 12262WAA03
Supersession(s): 12262-WAA03


https://parts.sheehytoyotafrederick...Ps4Cuo24-kczROckKz-sggVnGhX4eu6oOjZqVSJn17ms8

 

[genoxy]

Had the same thing happen to me. My local dealer has good prices and discounts on the parts. I got it for less than $25. I thought it would be $100+.


PIPE SUB-ASSEMBLY, VENTILATION
Part Number: 12262WAA03
Supersession(s): 12262-WAA03


https://parts.sheehytoyotafrederick...Ps4Cuo24-kczROckKz-sggVnGhX4eu6oOjZqVSJn17ms8

Thank you, ordered from local dealer also. Part will be $60 AUD and coming from Japan so will take a few weeks. Ordered a new screw also.

 

[genoxy]

Arrived today, only took 3 months

 

[retr0styl3z]

I cant for the life of me get that hose disconnected when trying to install my new intake. Any suggestions?

 

[MYA90SUPRA]

I cant for the life of me get that hose disconnected when trying to install my new intake. Any suggestions?

The one on my car fought me for awhile, But you have to squeeze it in the right spots. My hands are very big so I had trouble getting them in for best leverage. I wouldn't use tools to squeeze it because it will probably break.

 

[retr0styl3z]

I finally managed to get it off and get my intake in. Wasnt as easy as the video i watched but its all good now.

 

[SuprastarCO]

Yep. Was in the same boat. Safe to say if you are upgrading the intake, may as well pick up this part ahead of time.

 

[Nocturnal LE]

Video shows how to get that part off.. starting at the 2:54 mark

 

[genoxy]

Yep. Was in the same boat. Safe to say if you are upgrading the intake, may as well pick up this part ahead of time.

I'd say at least 25% of all Supra owners have broken this hose when installing their CAI

 

[gdi2290]

I broke mine too installing an inlet replacement. I ordered the mishimoto catch can which replaces this hose with a flexible one (you can also just buy a hose and reuse the ends). I still have to order the oem part which is needed to upgrade the hose to the flexible one.

Sponsored