Sponsored

Weird electrical noise rear end (VIDEO)

shqko

Member
First Name
Steph
Joined
Jan 26, 2024
Threads
4
Messages
15
Reaction score
4
Location
Florida
Car(s)
2020 Supra 3.0
Hi all, apologies if I’m dumb but I have this electronic buzzing at the rear bumper. I thought it was the fuel pump maybe and itd been parked for 3 hours still making that noise. My battery only lasted 6 months but I think it’s bc I had my Ecutek dongle plugged into the OBD port constantly (I know mistake). I replaced the battery today and I get the start engine battery management warning (I also had this warning with the old battery everytime I went to start the car). I reprogrammed the battery and it seems like it’s still draining. Is there something that is just passing over my head? I’m not stock whatsoever and the battery is a

Duralast Platinum AGM Battery BCI Group
Size 95R 950 CCA H9-AGM

The noise might not be the culprit but I hear even when the car is on.

Sponsored

 
OP
OP
shqko

shqko

Member
First Name
Steph
Joined
Jan 26, 2024
Threads
4
Messages
15
Reaction score
4
Location
Florida
Car(s)
2020 Supra 3.0
 

razorlab

Well-Known Member
First Name
Bryan
Joined
Oct 2, 2021
Threads
29
Messages
8,568
Reaction score
16,798
Location
Hudson Valley, NY
Car(s)
Not a Corvette.
sounds like fuel pump. Do you have an upgraded LPFP?

That warning you are getting is something is being parasitic and drawing energy.
 
OP
OP
shqko

shqko

Member
First Name
Steph
Joined
Jan 26, 2024
Threads
4
Messages
15
Reaction score
4
Location
Florida
Car(s)
2020 Supra 3.0
sounds like fuel pump. Do you have an upgraded LPFP?

That warning you are getting is something is being parasitic and drawing energy.
i have a walbro 525 secondary fuel pump. This is my mod list!
IMG_5445.webp
 
OP
OP
shqko

shqko

Member
First Name
Steph
Joined
Jan 26, 2024
Threads
4
Messages
15
Reaction score
4
Location
Florida
Car(s)
2020 Supra 3.0
I bet either the relay or the Motiv Reflex is wired to constant power
It’s my relay. I unplugged it and the noise went away. The trigger wire from the relay is plugged into the MOTIV. I’m going to put a diode on it and see if that works if not then my question is why didn’t he tap the trigger wire into the fuse box to a IGN-ON power source. Am I missing something? Will it not perform as well?

IMG_7D8C0B37-28D9-4F1E-87BD-FE5234BB4EE6.webp
Sponsored

 
 








Top