What did you do to your Supra today?

[Rad_AMG]

Had my guy Mark wrap my mirror caps in a carbon fiber vinyl. The specific film is called gloss nemesis black cf by Metro Restyling. Also put on my Verus anti-buffeting wind deflectors. Had those wrapped in the same cf film as well for a perfect match. Anyone in the Greater Seattle-area looking to get vinyl wrap work done, I highly recommend Mark Wu. His Insta is @wuwraps and you can DM him through there for quotes. Or text him at 206-707-6491.

 

[DarkZupra]

It was pretty easy, I just removed a handful of bolts from the bottom of the rear diffuser and then flexed it back. You can then see the back side of the reflectors and the clips that hold them in. You can use a long screwdriver to unclip one side, then grab it from outside the car and pull it out gently. One of mine came out cleanly, the other bent one of the clips on the reflector backwards a bit, but I was 1) able to bend it back into place, and 2) removing the reflectors anyway so I didn’t really care. Once the old ones are out. The new ones just snap into place.

Thanks for the info! I was actually able to do it without removing anything. I just used my aluminum pry tool and was able to just pop them out. I thought it was going to be so much more difficult.

 

[djbilly]

Did some BimmerCoding.

- Added Sport+
- Activated rear DRLs
- Turned on lock/unlock acoustic beep
- Car starts up in Sport Individual
- Passenger mirror only tilts 40% when reverse selected
- Removed pop-up screen that appears when pressing traction button

Also ordered some 12mm wheels spacers with extended bolts and the Burger Motorsports Tow-hook Front Number Plate Holder.

 

[Andrew4Supra]

Did some BimmerCoding.

- Turned on lock/unlock acoustic beep

~ Can you tell me where you found this?

I’ve been unsuccessful and would like to turn mine off.

 

[BrettS]

Toyota Canada sent me these monopoly pieces. Very cheaply made though

 

[BA9092]

- Activated rear DRLs

I've been wanting to do this but don't know how.

 

[JRedMKV]

Did some BimmerCoding.

- Added Sport+
- Activated rear DRLs
- Turned on lock/unlock acoustic beep
- Car starts up in Sport Individual
- Passenger mirror only tilts 40% when reverse selected
- Removed pop-up screen that appears when pressing traction button

Also ordered some 12mm wheels spacers with extended bolts and the Burger Motorsports Tow-hook Front Number Plate Holder.

Rear DRL’s? What does that look like? Pics please. Thanks!

 

[FullmetalHeart]

BMS spacers, 10mm front 13mm rear

 

[Sub-MkV]

I lowered my car on Vogtland 1.2 inch springs and installed my painted TRD style spoiler.

 

[BA9092]

Rear DRL’s? What does that look like? Pics please. Thanks!

I'm assuming the tail lights are on with the front DRLs, all the time.

 

[Andrew4Supra]

I lowered my car on Vogtland 1.2 inch springs and installed my painted TRD style spoiler.

~ Looks great!

 

[Huddleston]

Wrapped up an epic weekend on the Southern Express rally!

 

[NcreAighStonH]

Thanks for the info! I was actually able to do it without removing anything. I just used my aluminum pry tool and was able to just pop them out. I thought it was going to be so much more difficult.

How's the paint match?

 

[DarkZupra]

How's the paint match?

Im not sure these are actually painted, just plain black plastic. It basically disappears though. Looks way better than the reflector.

 

[SupraMK86]

Replaces safety reflector with cheap black plastic door mat looking thing. #floridaman