Small, side mounted OEM storage net for trunk?

[BA9092]

Got it done! Thanks @brentyloke for the spare grommets!

Sponsored

 

[nosavingthrow]

Did mine today too. I goofed up the positioning a little which resulted in the net a little further out / angled and more forward than I wanted, but overall looks OK and works fine. It is securely in place.

I used a couple car grommet fasteners on the sides I found at the local hardware store.

First aid / emergency kit fits really well in the cubby!

 

[ToyoBMW]

Maybe that area is to store a quart of oil

 

[Tsuki]

Maybe that area is to store a quart of oil

It's BMW - it probably is. At least they recognize the problem!

https://www.amazon.com/Genuine-BMW-...ords=bmw+oil+quart+bag&qid=1626793491&sr=8-24

 

[ToyoBMW]

It's BMW - it probably is. At least they recognize the problem!

https://www.amazon.com/Genuine-BMW-...ords=bmw+oil+quart+bag&qid=1626793491&sr=8-24

I believe this is a nice addition to the car, everyone needs an extra quart of oil in their cars.

 

[corye]

I know this is an old thread, but I just purchased this today realizing there isn’t holes. Can someone offer some type of measurements to help. I can be a bit clumsy and I don’t want to ruin my trunk liner…

 

[nosavingthrow]

I did a pretty sloppy job on this myself, and wish the fitment was a little better. I didn't really measure, I just kind of held it in the spot as best I could and marked where the "prongs" would go through the liner. This resulted in an OK but not perfect fit. I also kind of just yolo drilled holes through the liner, not sure if there was much risk of hitting wires behind it etc, but I'd be very careful with that part.

 

[MyCorolla]

I know this is an old thread, but I just purchased this today realizing there isn’t holes. Can someone offer some type of measurements to help. I can be a bit clumsy and I don’t want to ruin my trunk liner…

See posting #28:

https://www.supramkv.com/threads/small-side-mounted-oem-storage-net-for-trunk.9605/post-142042

 

[corye]

I’m content with it although I wish I could have done a bit better.

 

[nosavingthrow]

I’m content with it although I wish I could have done a bit better.

That is pretty much how mine went as well. Decent enough, but not perfect. I think it is largely the long, hooked shape of the top-right prong that makes it a bit tricky to line up perfectly. That said, yours look really good!

 

[SupraTimo]

Got it done today. Thanks @brentyloke for the spare grommets .
It looks great. Not perfect but it looks great !

Sponsored