What did you do to your Supra today?

[Traxion]

Got my USR Harness bar today. The pictures don't show the red as good as it is in person. It matches nicely with the other red accents. The splash of additional color inside is nice and I'll see if the rattle that I thought was coming from the OEM bar is gone now.

 

[Sam B]

Are those bars hard to install

 

[puzzled]

I bought a Fiamm low frequency horn. Maybe some day I will have enough courage to remove the front bumper on my Supra as I have removed bumpers on all my hobby cars thus far.. huh?

 

[JDG520]

Finally lowered it on HKS adjustables.

 

[BA9092]

Are those bars hard to install

I think those are the ones that mount to the subwoofer joints and not the flimsy brackets where the OEM one does.

 

[Traxion]

Are those bars hard to install

It wasn't hard but there were no instructions so if I did things in the right order and screwed things in the right order it would have been easier. Both side brackets first, screw them in, then bar between brackets and screw in the end screws to the bar. It uses oem mounting points. I reused the oem screws for the bracket since the included ones were too big.

 

[B58_ hwAyaq]

I bought a Fiamm low frequency horn. Maybe some day I will have enough courage to remove the front bumper on my Supra as I have removed bumpers on all my hobby cars thus far.. huh?

Do it. Besides realigning it upon reinstallation (just trial and error), it's pretty easy because it's all bolts. No clips. (well, plus two parking sensor plugs)

 

[subimmer]

Do it. Besides realigning it upon reinstallation (just trial and error), it's pretty easy because it's all bolts. No clips. (well, plus two parking sensor plugs)

I’m scared of taking off my bumper for my Seibon lip because I feel like the bumper wouldn’t give me the same fitment it had before I took off. My Subie did that.

 

[SD_MK]

Attended my little bro-in-law's high school graduation, a LOT of attention drawn to the Supra.. MAAAAD stares and pictures. This group of kids even came up to me asking if they can take a picture with my car as i was about to leave. Lol

Then kicked it with that one guy @mokleen , yeah, that guy. We did some bimmercoding to a couple of other Supras lol. Pretty chill day.

 

[travsam89]

Just installed the Visconti Flex kit, cant wait to feel the difference between my current OTS 91 tune and a custom flex tune.

 

[mokleen]

Attended my little bro-in-law's high school graduation, a LOT of attention drawn to the Supra.. MAAAAD stares and pictures. This group of kids even came up to me asking if they can take a picture with my car as i was about to leave. Lol

Then kicked it with that one guy @mokleen , yeah, that guy. We did some bimmercoding to a couple of other Supras lol. Pretty chill day.

Mokleen is the one in the back, stock

 

[Roman]

BC Forged <3

 

[Evolution]

I got my new tires mounted. The guys at the tire shop thought I was crazy. 315s are big....

 

[VA90]

I got my new tires mounted. The guys at the tire shop thought I was crazy. 315s are big....

for a second, I thought you wedged all these tires in a Supra

 

[puzzled]

Do it. Besides realigning it upon reinstallation (just trial and error), it's pretty easy because it's all bolts. No clips. (well, plus two parking sensor plugs)

So I got the bumper off and making the wire harness for the low freq horn.

The factory red-white wire is the power I am assuming..

I was expecting the brown to give me 0V with a known ground and infinite for red-white.. but both give me 0V.

Shall I tap both wires? One for + one for -..