D-VO
Member
- First Name
- Daniel
- Joined
- Oct 25, 2020
- Threads
- 2
- Messages
- 18
- Reaction score
- 2
- Location
- Winter Garden Fl
- Car(s)
- 2021 Supra (a91) Tungsten
- Thread starter
- #1
Hey guys. Interested to know if anyone has had an issue like mine here: Usually when I take my car into service at the dealer I remove the protune then re-install when I get the car back. This time around after install the car has no power. I called the dealer and asked if there was any update on the ecm thinking there may be some sort of new update that disables the unit somehow, they said no. (To my knowledge they don't know I use the protune).
I get 4 codes that point to the 3 sensors that the protune modifies:
P0367 - Camshaft Position Sensor "B" Circuit Low (bank 1)
P0238 - turbocharger boost sensor "A" Circuit high
P0108 - Manifold Air Pressure Barometric Sensor Circuit High Voltage Input problem
P007D - Charge Air Cooler Temperature Sensor Cicuit High bank 1.
Any ideas? So far I removed the unit and re-installed with no change, removing the unit solves the issue but its back to normal "my first sports car" power. I looked at all the plugs looking for displacement of connectors or frayed wires, I got nothing.
I get 4 codes that point to the 3 sensors that the protune modifies:
P0367 - Camshaft Position Sensor "B" Circuit Low (bank 1)
P0238 - turbocharger boost sensor "A" Circuit high
P0108 - Manifold Air Pressure Barometric Sensor Circuit High Voltage Input problem
P007D - Charge Air Cooler Temperature Sensor Cicuit High bank 1.
Any ideas? So far I removed the unit and re-installed with no change, removing the unit solves the issue but its back to normal "my first sports car" power. I looked at all the plugs looking for displacement of connectors or frayed wires, I got nothing.
Sponsored