What did you do to your Supra today?

[razorlab]

Yeah sure.

That front toe is horrible. RIP your tires.

 

[a90.faz]

Changed the black Supra in iDrive to a cat ? (no cats were harmed in the making of this mod). Will be swapping it with a pic of my car soon

 

[Eplejus]

Yeah sure.

Rear is fine, but that front toe is waaay to aggressive. Tell your alignment guy to re-do it properly.

The guy I use, that does a lot of track day Porsche's and BMW M cars, recommended me not to go more than 0.04' / 0.6mm in total front toe for a car that is mostly street driven, but occasionally sees a track day.

 

[razorlab]

Rear is fine, but that front toe is waaay to aggressive. Tell your alignment guy to re-do it properly.

The guy I use, that does a lot of track day Porsche's and BMW M cars, recommended me not to go more than 0.04' / 0.6mm in total front toe for a car that is mostly street driven, but occasionally sees a track day.

Right. No reason to not do zero front toe for a street driven car. Hell, I use zero in front on my 95% track use Supra.

 

[YukonSupra]

Changed the black Supra in iDrive to a cat ? (no cats were harmed in the making of this mod). Will be swapping it with a pic of my car soon

How did you do that??

 

[a90.faz]

How did you do that??

Guide here:
https://www.supramkv.com/threads/guide-custom-supra-icons-throughtout-idrive.24478/

 

[YukonSupra]

Guide here:
https://www.supramkv.com/threads/guide-custom-supra-icons-throughtout-idrive.24478/

Cool, thanks!

 

[FuzzyRev]

Guide here:
https://www.supramkv.com/threads/guide-custom-supra-icons-throughtout-idrive.24478/

Cool, thanks!

Can't wait to sneak this onto a buddy's MKV...

 

[Dven11]

To keep it fresh, Supra WeatherTech sticker.

Going to have to trim the mat to fit.

I like this! Where can I get one?

 

[a90.faz]

Can't wait to sneak this onto a buddy's MKV...

If they forget their WiFi OBD adapter plugged in, you could sneak it in from a far ?

 

[yo dude]

I like this! Where can I get one?

Stickerfab!
https://www.stickerfab.com/products...4i1v8RP5KJg6mmw1jlZX1V&variant=49430805086527

 

[DCP]

How many hers pers? What other mods do you have?

So it's pure800, meth and port, DP and intake, gets 405wkw on pump, and then on e40, 516wkw. Tuner says pwr needed to be limited due to gearbox and head gasket though.

 

[stormgreysupra]

New OEM+ Beadlock Wheels

 

[SupraYYJ]

I've gotten a sarcastic-sounding "nice BMW" or "nice Bimmer" twice: once from a dude in the passenger side of a Pontiac Grand Am, once from a dude on a bicycle outside the government liquor store. ?

Best one yet: tonight I picked up my pizza at Domino's, and a guy rummaging through a dumpster in the parking lot poked his head out and asked "is that a BMW"? ?

 

[i3igpete]

15.5 inches to the edge of the hood will align the gurney flap of the racelouver vent with the rear edge of the rad cover plate. most folks are mounting the triple seven vent 18.5 inches back, but Albert @ RL says 2 inches behind the rear plane of the radiator stack is ideal. since the rad plate extends back 3.5 inches, this seems like a nice compromise.

this is the 30x9 version. there is also a 30x14 variant but albert says he doesn't really recommend that one much because it can make some hoods too floppy.