Aliexpress B58 Gen2 Manifolds??

[FLtrackdays]

A little update, intake is in ??

Ill report back how it goes tomorrow.

Curious on how much heat will come down. Well done ?

Sponsored

 

[Darkseid69]

Fully installed, the most difficult part was removing the stock intake manifold.

I followed the Kies motorsport csf intake manifold install video.

Intake temps are cooler and sit around 10-15 deg C above ambient vs when i had the stock manifold with similiar temps between 20- 25 deg C above Ambient.

Something else i noticed is that the intake temps come down a lot quicker then with stock temp amd it doesnt heat soak.

 

[rottmore]

WOT + AirTempPrethrottle - IAT = Radiator Performance. Can we get some actual data prease?

 

[shaloot]

This guy makes quality Supra / B58 content and has a vid of this manifold. He deserves more likes and subs for sure.

edit: ok maybe it’s a diff manifold? Aliexpress vs Alibaba I’ve no idea if there is any difference

 

[shaloot]

Fully installed, the most difficult part was removing the stock intake manifold.

I followed the Kies motorsport csf intake manifold install video.

Intake temps are cooler and sit around 10-15 deg C above ambient vs when i had the stock manifold with similiar temps between 20- 25 deg C above Ambient.

Something else i noticed is that the intake temps come down a lot quicker then with stock temp amd it doesnt heat soak.

Does the engine cover fit? I see it’s got the little bung for it on top at the back.
not sure if using the phenolic spacer would cause it to sit too high or not

 

[rottmore]

This guy makes quality Supra / B58 content and has a vid of this manifold. He deserves more likes and subs for sure.

edit: ok maybe it’s a diff manifold? Aliexpress vs Alibaba I’ve no idea if there is any difference

This dude just logs IAT's. Doesn't even log intake air temps before throttle. How are we suppose to know how the radiator preforms?

 

[shaloot]

This dude just logs IAT's. Doesn't even log intake air temps before throttle. How are we suppose to know how the radiator preforms?

Gotcha I hadn’t watched this video yet just saw it mentioned logs and that cheap manifold.
Try shooting him a message or comment id bet you he would revisit it and log whatever. Pretty sure he’s unlocked since he runs a remnant kit.
Though it would certainly have been best if they could get logs on stock mani then same logs same day after the new one installed

 

[razorlab]

This dude just logs IAT's. Doesn't even log intake air temps before throttle. How are we suppose to know how the radiator preforms?

He actually has it in the log as "charge temp", he scrolls past it. So it's there, he just doesn't use it as a vector, which is a bummer.

 

[rottmore]

He actually has it in the log as "charge temp", he scrolls past it. So it's there, he just doesn't use it as a vector, which is a bummer.

Didn't catch when he was scrolling in the logs. I stopped watching after his second video where he would keep focusing on IAT's which is fine i guess, but i just want to know how each radiator design performs.

 

[razorlab]

Didn't catch when he was scrolling in the logs. I stopped watching after his second video where he would keep focusing on IAT's which is fine i guess, but i just want to know how each radiator design performs.

MegaLogViewer makes it easy to setup a custom math channel that visualizes what you are talking about. I use it a bunch.

Here is an example that is Charge temp - IAT, which basically shows how much heat the Mani-cooler is shedding. It's shedding 223F in this instance:

 

[rottmore]

MegaLogViewer makes it easy to setup a custom math channel that visualizes what you are talking about. I use it a bunch.

Here is an example that is Charge temp - IAT, which basically shows how much heat the Mani-cooler is shedding. It's shedding 223F in this instance:

thank you for posting actual data lol

 

[razorlab]

thank you for posting actual data lol

I've posted a good amount of data on the Wagner manifold before. It's all in the big manifold thread.

 

[Vuuduu]

Any updates to the alibaba manifold?

 

[Ryco]

Curious as well

Any updates to the alibaba manifold?

Sponsored