Mickey Thompson et street ss 285/35/19

[a90moe]

Tried MT ET SS 285/35/19 with 275/35/19 front PSS

On 57CR 9.5F 10.5R with hub rings

Car would not track straight, literally ate two lanes upon deceleration and sways a lot at higher speeds

Scared the sh!t out of me

Sponsored

 

[Calderon93]

Tried MT ET SS 285/35/19 with 275/35/19 front PSS

On 57CR 9.5F 10.5R with hub rings

Car would not track straight, literally ate two lanes upon deceleration and sways a lot at higher speeds

Scared the sh!t out of me

Hmmm. I’m on 255 front. I agree I felt the same at first. Super sketchy. But after hubrings proper alignment and burnout (to burn off factory tire coating ) the car tracked pretty good on the straight line. TC off definitely helps. With it on I did noticed it wanting to swerve

 

[a90moe]

Hmmm. I’m on 255 front. I agree I felt the same at first. Super sketchy. But after hubrings proper alignment and burnout (to burn off factory tire coating ) the car tracked pretty good on the straight line. TC off definitely helps. With it on I did noticed it wanting to swerve

Tires are defected

Replacing with 305/35/19 NT05R's tomorrow

 

[Calderon93]

Tires are defected

Replacing with 305/35/19 NT05R's tomorrow

Defected?... how?

 

[a90moe]

Defected?... how?

Not sure how exactly but upon balancing it was not straight

Also, traction is non existent, car spins at 70mph in 4th gear. I took them off a friend who removed and asked me to check and see how they felt on my car so all is good..

So yeah defected.. Which is a rare occurrence

 

[a90moe]

Tracks 100% straight

305/35/19 NT05R

 

[Calderon93]

Tracks 100% straight

305/35/19 NT05R

Are you lowered?

 

[a90moe]

Are you lowered?

Yes H&R

 

[Kiwi Greg]

Tracks 100% straight

305/35/19 NT05R

Very nice, are they circuit or drag tires ?

I assume the MTs are a drag tire ?

What tire pressure & rim width were you using ?

 

[a90moe]

Very nice, are they circuit or drag tires ?

I assume the MTs are a drag tire ?

What tire pressure & rim width were you using ?

These are DR's however stiffer sidewall that MT's so OK handling

At 32PSI for now and rim width is 10.5

 

[Calderon93]

These are DR's however stiffer sidewall that MT's so OK handling

At 32PSI for now and rim width is 10.5

No rubbing at all with 305/35?

 

[a90moe]

No rubbing at all with 305/35?

Zero rub with the 57CR 19x10.5 +35 rear

 

[Szokdogg]

Cars at the shop right now. They are telling me it's definitely going to rub with my 15mm spacers installed. Having them take the spacers out and try without. They def look a little too wide for the stock rims... It looks better in person than pictures tho. Kinda wish I would have went with the 285's.

 

[Ultimateone]

Wait, what size are those on the stock wheels?

 

[Szokdogg]

Mickey Thompson et street ss 305/35r19

Sponsored