If you have access to 93 octane, you can run Map 3 on 2020 models (they respond better to the additive based maps, +6 psi on this one I believe) and for 2021 models, your best bet is to datalog and have BMS help dial in the tune on Map 5 with some adjustments. I did around a week of datalogging...
I had my JB4 on the second week. Then another week of lots of datalogging and adjustments with the direct guidance from Terry at BMS. As mentioned before, this is my third time using their piggyback system and I have never had a single issue with their platform or maps.
You'll be a little...
JB4 all the way! I ran this on my Golf R and Type-R with zero issues and seriously impressive gains. This piggyback ECU system alone will give you that desired 0-60 time (several reviewers on normal back roads have accomplished 4.5 seconds to sixty stock). I'm on a customized version of Map 5...
It took a while to get these in but it was so worth it! Gram Lights 57DR in Sputter Blue (19x9.5 and 19x10.5, both 22 offset). 255/40/19 and 275/40/19, Firestone Firehawk Indy 500 tires.
Just got these on last week! I'm a sucker for blue against white and these are without a doubt my absolute favorite =)
Gram Lights 57DR in Sputter Blue. 255/40/19 up front, 275/40/19 rear. Wrapped in Firestone Firehawk Indy 500's. I have never been stopped by so many people for pictures...
Glad I got our 2.0 last month! Absolutely love it ;b
With it tuned to target 22 psi (should be around 300whp) and the blue Gram Lights that are going on tomorrow, it's almost near perfect for me alongside the carbon fiber goodies already on ;b
Had to have mine replaced. It was drained from sitting in the showroom and not properly turned off (hold down the radio button for 2 seconds to shut the screen off and then lock the car, which shuts down everything completely).
The dealership will have to test it first, which takes 1-2 hours...
Oh, my apologies! New to the platform and parts here. Let me correct myself, I'm very happy with my Rexspeed V1 in high gloss =) Definitely plan on adding carbon fiber to the other areas of the MKV, where exterior black plastic inserts are present.
Nice setup! I put on the same style, high gloss carbon fiber wing on yesterday and after a week of data logging, I also got my JB4 tune dialed in thanks to Terry and Ando at Burger Motorsports...she rips ;b They are estimating around 300WHP, on a customized version of Map 5 running 93 octane...
I was told the same from Burger Motorsports. Basically the same block, missing those 2 additional cylinders. Both are closed deck design as well, making each very strong. Forged internals as well on the B48, minus the pistons.
Some people will obviously use too much boost, run a...
I've never had a single issue with using Burger Motorsports and their piggyback systems on any of my rides. These systems have a mountain of safety nets built-in to the tuning module, as well as allowing the factory ECU to take over the reigns if parameters are breached that the engine doesn't...
That definitely seems more realistic. Being able to hit 60 in the mid 4 second with a good launch tells a lot right off the bat. I just got the JB4 Tuner installed on Monday and have been working with Burger Motorsports all week on customizing the tune and getting it perfectly dialed in. We...