Banks iDash + Aeroforce Single Gauge Pod

[B58_ hwAyaq]

Is the Banks idash easy to use and has it been working fine for you??? Any review as I noticed on the Banks website no BMW or GR Supra options to choose on their site.

Yeah, like @Thraxbert said, it just plugs into the OBD port. I believe that if you have one of the mentioned vehicles on the Banks website, you may get additional data available for display, but for the Supra, you get all the main things one would want to keep an eye on - no issues.

Sponsored

 

[3TMagnetMan]

toyota-supra-keeps-eye-on-power-with-idash

 

[PotatoKing]

Wow that look sick. Too bad they don’t make it for right hand drive cars and I have just got the P3 gauges.

 

[BA9092]

I love mine! However, sometimes it doesn't turn back on after restarting the car. And sometimes it displays a double dash "--" under all parameters when it does come back on.

Those without any issues, what are your vehicle settings and wake settings? I've got my auto-start/stop turned off via Bimmercode, so I have that set to normal.

 

[3TMagnetMan]

Installed my Banks Gauge great to see more information for the car. I think everyone should add this gauge to their Supra

 

[mattieewhooo]

It's a great gauge! But not when it decides to power down randomly, lol

 

[BA9092]

It's a great gauge! But not when it decides to power down randomly, lol

Or not power back up.

 

[B58_ hwAyaq]

Or not power back up.

Have you changed your wake sensitivity? I had the same issue. Had to move it to whatever the highest setting is (as in top of the list).

 

[BA9092]

Have you changed your wake sensitivity? I had the same issue. Had to move it to whatever the highest setting is (as in top of the list).

I did. These are my current settings. Should I change it to 'extremely high' ?

Also, I was told by others to change from 'standard' to 'hybrid/start-stop'

 

[B58_ hwAyaq]

I did. These are my current settings. Should I change it to 'extremely high' ?

Also, I was told by others to change from 'standard' to 'hybrid/start-stop'

I believe mine is at extremely high (after testing “high”).

I don’t think I messed with the start/stop, but I also have that bimmercoded to just remember the last setting (so effectively disabled because I don’t like start/stop).

 

[BA9092]

I believe mine is at extremely high (after testing “high”).

I don’t think I messed with the start/stop, but I also have that bimmercoded to just remember the last setting (so effectively disabled because I don’t like start/stop).

Ok, I'll change it to 'extremely high' and see how that does. Thanks!

Yeah, I also have my 'start-stop' coded to remember the last setting via Bimmercode, but I don't know if that setting really does anything in this case.

 

[3TMagnetMan]

I believe mine is at extremely high (after testing “high”).

I don’t think I messed with the start/stop, but I also have that bimmercoded to just remember the last setting (so effectively disabled because I don’t like start/stop).

I just had this issue today of the gauge shutting off and changed my settings like yours. Also had to kind of bend the tab so I can take it off the the plug. Hopefully this works

 

[BA9092]

I just had this issue today of the gauge shutting off and changed my settings like yours. Also had to kind of bend the tab so I can take it off the the plug. Hopefully this works

Did you leave the 'standard' setting or change it to 'hybrid/stop-start'?

 

[3TMagnetMan]

Did you leave the 'standard' setting or change it to 'hybrid/stop-start'?

I set it up with Hybrid/Stop Start

 

[3TMagnetMan]

It's a great gauge! But not when it decides to power down randomly, lol

It happened to me today bummer. I had the aeroforce gauge before and it never read any of the parameters and shut down. The aeroforce works on my Toyota FJ cruiser no issues.

Sponsored