Brake shudder?

[FLtrackdays]

That is funny as I actually had a beast sticker made as someone else called it the beast but I took it off when I made the new end plate so do not have a pic. Also I blew a turbo so do not recommend playing around with boost as the cars are fast enough . I have a charge pipe. Catless down pipe cold air intake and aftermarket exhaust. Nothing else no tune or boost. Run 30% ethonol mix. With just everything stock. Car Dyno at 426 max hp at rear wheels with 420 average using NASA classing sheet. Spend your money on tires , shocks , brakes , control arms and not trying to get more hp. You will be happier and your pocked book will like you too.

This
funny bout the sticker and 100% agree!!

Sponsored

 

[Todday1]

I found the beast sticker

 

[kaj]

It's probably been said, But your issue was likely uneven pad deposits from not bedding the brakes in properly. I've had this problem for the same reason once, I took some sandpaper to the discs and removed all the pad deposits. Problem solved. I made sure I bended them in right the next time ?
The odds of a rotor actually warping are pretty much zero

 

[FLtrackdays]

It's probably been said, But your issue was likely uneven pad deposits from not bedding the brakes in properly. I've had this problem for the same reason once, I took some sandpaper to the discs and removed all the pad deposits. Problem solved. Make sure I bended the men right the next time ?
The odds of a rotor actually warping are pretty much zero

I remember doing this with a drag car guy, buddy, long ago. Was thinking, wtf… But it worked! Great reminder/suggestion!!!!! Thx @kaj ?

Certainly doesn’t hurt to try

Sponsored