Dinan Intakes for the Toyota GR Supra

[indymajor]

About an hour if you are taking your time. That said, most of the engineers here can probably uninstall and install that family of intakes in about 15 minutes just from doing it consistently during R&D so it definitely can be done MUCH quicker.

FWIW all reccommended install times are listed under the "specs" section of each of the product pages on the website.

Im needing this exhaust ASAP, all the other Carbon bits along with CAI, Inlet and engine cover going on in two days. Hoping to not have to remove the Diffuser to install the exhaust. Any ETA on the exhaust?

Sponsored

 

[Dinan_Engineering]

Im needing this exhaust ASAP, all the other Carbon bits along with CAI, Inlet and engine cover going on in two days. Hoping to not have to remove the Diffuser to install the exhaust. Any ETA on the exhaust?

Don't do ETA's as it always bites me in the rear. It creates expectations that may not be met and ultimately pissed off people as a result of things I have no control of. All I will say is it's coming -- and sooner rather than later.

 

[bushido]

Yes it will. Keep and eye out I’m switching intakes again soon and will be selling my dinan intake/inlet and dinan strut bars for a good discount. I have a disease at this point spending money on this car

i got dibs

 

[PikkaGTR]

Don't do ETA's as it always bites me in the rear. It creates expectations that may not be met and ultimately pissed off people as a result of things I have no control of. All I will say is it's coming -- and sooner rather than later.

Can you at least tell us if the tentative Dinan exhaust will be a valved unit?
I had the Dinan rear section and midpipes on the F80 and it made the S55 at least sound respectable

 

[Dinan_Engineering]

Can you at least tell us if the tentative Dinan exhaust will be a valved unit?
I had the Dinan rear section and midpipes on the F80 and it made the S55 at least sound respectable

It is valved.

 

[SilverMk5]

Curious, have you tried it with the lid off?

I have, I just installed mine yesterday. Currently is -5 to -10 Celsius where I live so I don't notice a big difference with the lid on/off. With the lid off its actually not that much louder, I would say maybe an extra 5-10% louder? But you lose the look for the carbon lid but also you have a nice blue exposed filter so its up to you

 

[bushido]

I have, I just installed mine yesterday. Currently is -5 to -10 Celsius where I live so I don't notice a big difference with the lid on/off. With the lid off its actually not that much louder, I would say maybe an extra 5-10% louder? But you lose the look for the carbon lid but also you have a nice blue exposed filter so its up to you

aw, really? wanted to take mine off this weekend since we're finally in decently fresh weather.. hmm.. thanks for sharing!

 

[SilverMk5]

aw, really? wanted to take mine off this weekend since we're finally in decently fresh weather.. hmm.. thanks for sharing!

Yeah, i was expecting a bigger difference since Im basically opening up the whole intake. The only real difference in sound was the BOV/Flutter is a bit louder in the cabin with the lid off, but the intake suction noise with the lid on/off was basically the same. Still deciding if I want to put it back on or not since its so cold here in Canada that my IAT's are always low.

 

[bushido]

Yeah, i was expecting a bigger difference since Im basically opening up the whole intake. The only real difference in sound was the BOV/Flutter is a bit louder in the cabin with the lid off, but the intake suction noise with the lid on/off was basically the same. Still deciding if I want to put it back on or not since its so cold here in Canada that my IAT's are always low.

o
wait
that's exactly what i want
excellent
thanks LOL

 

[SilverMk5]

o
wait
that's exactly what i want
excellent
thanks LOL

Just make sure you dont lose the rivet pins like me when taking off the lid..... Lost like 2 of them by dropping them in the bay lol. A good tip to remove then is just wear some thin winter gloves so u dont poke your hand and just use ur index finger and push up from the bottom of the pin. The pin will slide right out

 

[SCZ4]

Dinan- When's the intake likely to be back in stock?

 

[Dinan_Engineering]

Dinan- When's the intake likely to be back in stock?

All existing orders (aka: backorders) will be shipping by the 18th at latest. A new order would not be fulfilled until sometime in January as some components to build additional units (mounting brackets and heat shields) aren't expected in until the very end of December.

 

[SupraNews]

Here is a sound clip of the intake with turbo inlet. I just had my phone sitting on the passenger seat. I'm sure someone can get a better clip.
Dinan Intake Sound

Late here but do you have any videos of the sound?

 

[Basil_a]

Figured I would throw up some feedback on the Dinan intake and turbo inlet. Install was relatively straight forward. Tricky parts were finding a way to pop off the spring clip and breather hose as expected. Build quality was pretty great. As far as sound goes, it is definitely not as loud as the Armaspeeds and MSTs of the world but I think it is a great option for those looking for certainly more noise but not over the top. Under everyday lighter throttle driving, you won't hear it as much but under load you will. You can certainly hear it in lower-mid RPMs with heavier throttle just for fun. I would say this is certainly more mature and refined without a flutter rather than agressive. Overall, I am very pleased!

 

[Basil_a]

Sponsored