Lower Control Arms / Best brand?

[feitu232]

Hello!

I recently got an alignment and they mentioned my camber is -2.7 for my rear. Shop had suggested I get Lower control arms

Does anyone have suggestions on which brand to go with? I checked out SPL but couldn't find any lower ones.

Thanks!

Sponsored

 

[Kamber]

Consensus seems to be that Verkline suspension arms are superior to SPL.

 

[Hasan]

-2.7 is a lot of camber. How much more do you need?

 

[feitu232]

-2.7 is a lot of camber. How much more do you need?

LOL trying to get that fixed

 

[Hasan]

LOL trying to get that fixed

The rear camber is adjustable from factory. So, the alignment shop should be able to dial it back to factory specs.

Might want to try another alignment shop.

 

[rwense]

Agreed with above, the shop should be able to correct that. Are you obscenely low or something like that?

Otherwise, I would suggest Verkline arms over SPL. You might have to wait longer and pay a bit more but you'll save so much time and money by not having to replace bearings all the time.

 

[feitu232]

Agreed with above, the shop should be able to correct that. Are you obscenely low or something like that?

Otherwise, I would suggest Verkline arms over SPL. You might have to wait longer and pay a bit more but you'll save so much time and money by not having to replace bearings all the time.

Not super low. Id say .6 to .7 drop from OEM

I ended up getting Eibach control arms. I know some people mentioned SPL was bad, but if I end up neededing Toes would SPL ones be ok?

 

[razorlab]

Not super low. Id say .6 to .7 drop from OEM

I ended up getting Eibach control arms. I know some people mentioned SPL was bad, but if I end up neededing Toes would SPL ones be ok?

So you ignored that you should be able to reduce the camber in the rear with OEM components?

 

[feitu232]

So you ignored that you should be able to reduce the camber in the rear with OEM components?

Shop mentioned it was at its max, they couldn't reduce it anymore

 

[razorlab]

Shop mentioned it was at its max, they couldn't reduce it anymore

If true, you are lower than .5/.6.

 

[bushido]

If true, you are lower than .5/.6.

@feitu232 i'm lowered 0.8" and at -2.2° all around. agreed with new shop

 

[razorlab]

@feitu232 i'm lowered 0.8" and at -2.2° all around. agreed with new shop

Bah, what do we know.

 

[feitu232]

@feitu232 i'm lowered 0.8" and at -2.2° all around. agreed with new shop

The sheet said my camber was originally at 3.35 lol then they dialed down to 2.7

Sponsored